Casio CW-L300 User Guide - Page 42

Cut Modes and Margins The following shows how the tape cut type (full or half) and margin length are affected by the tape cut mode and margin settings. Cut Mode CONT HALF CUT Cut Timing Margin Trimming of Cutting excess at between beginning each label of label Cutting after printing is complete FULL+HALF CUT FULL CUT Trimming of Cutting excess at between beginning each label of label Cutting after printing is complete Trimming of excess at beginning of label Cutting between each label Cutting after printing is complete UNCUT Trimming of Cutting excess at between beginning each label of label Cutting after printing is complete Cut NARROW Margin Half cut 18.5mm (3/4") Half cut Full cut Half cut Full cut Full cut 3mm (1/8") 3mm (1/8") 18.5mm (3/4")*1 5mm (3/16")*2 3mm (1/8") 3mm (1/8") Full cut 23.5mm (15/16") Full cut Full cut 3mm (1/8") 3mm (1/8") None 23.5mm (15/16") None None 3mm (1/8") 3mm (1/8") Cut MEDIUM Margin Half cut Half cut Full cut Half cut Full cut Full cut Full cut Full cut Full cut None None None 11.5mm (7/16") 10mm (3/8") 10mm (3/8") 11.5mm 5mm (7/16")*1 (3/16")*2 10mm (3/8") 10mm (3/8") 23.5mm (15/16") 10mm (3/8") 10mm (3/8") 23.5mm (15/16") 10mm (3/8") 10mm (3/8") WIDE Cut Half cut Margin 5mm (3/16") Half cut 21.5mm (7/8") Full cut Half cut Full cut 21.5mm 5mm (3/16")*1 21.5mm (7/8") 5mm (3/16")*2 (7/8") Full cut 21.5mm (7/8") None - Full cut 21.5mm (7/8") Full cut 21.5mm (7/8") None - None 21.5mm (7/8") None 21.5mm (7/8") Cut NONE Margin None - None - None - None - None - None - None - None - None - None - None - None - *1: Printing of first label *2: Printing of second and subsequent labels E 40