Casio FC-200V User Guide

Casio FC-200V - Financial Calculator With Display Manual

Get Casio FC-200V - Financial Calculator With Display PDF manuals and user guides
UPC - 079767167004
View all Casio FC-200V manuals
Add to My Manuals
Save this manual to your list of manuals

Casio FC-200V manual content summary:

  • Casio FC-200V | User Guide - Page 1
    E FC-200V FC-100V User's Guide CASIO Worldwide Education Website http://edu.casio.com CASIO EDUCATIONAL FORUM http://edu.casio.com/forum/
  • Casio FC-200V | User Guide - Page 2
    Important! CASIO COMPUTER CO., LTD. makes no guarantees concerning accuracy of the contents of this manual or their suitability for any commercial purpose or other particular purpose, or concerning the accuracy of calculation results (such as financial calculation simulation results) produced by
  • Casio FC-200V | User Guide - Page 3
    About this Manual • This User's Guide covers use and operation of the CASIO FC-200V and FC-100V. Operations apply to both models, except in cases indicated by the text "FC-200V only". • Keycap markings indicate what a key inputs or what function it performs. Example: 1, 2, +, -, A, etc. SHIFT
  • Casio FC-200V | User Guide - Page 4
    manual start out assuming that the calculator is set to a particular angle unit. This is indicated by the following marks. z : Degrees Z : Radians • The displays and illustrations (such as key markings) shown in this User's Guide use of this product and items that come with it. Moreover, CASIO
  • Casio FC-200V | User Guide - Page 5
    dn Periods/Y Bond Date Date Input PRF/Ratio B-Even Digit Sep. Angle Display Digits STAT Is initialized to this: End 365 CI Annual (FC-200V only) Date (FC-200V only) MDY PRF (FC-200V only) Quantity (FC-200V only) Off Deg Norm1 Off • For information about memory, see "Using Calculator Memory" on
  • Casio FC-200V | User Guide - Page 6
    correctly when you load it into the calculator. • Remove the battery if you do not plan to use the calculator for a long time. • Use only the type of battery specified for this calculator in this manual. Disposing of the Calculator • Never dispose of the calculator by burning it. Doing so can cause
  • Casio FC-200V | User Guide - Page 7
    using the calculator for the first time. • Even if the calculator is operating normally, replace the battery at least once every three years (FC-200V) or two years (FC-100V slow display response, total failure of the display, and shortening of battery life. Also avoid leaving the calculator in
  • Casio FC-200V | User Guide - Page 8
    it off with a cloth moistened in a weak solution of water and a mild neutral household detergent. Wring out all excess liquid before wiping the calculator. Never use thinner, benzene or other volatile agents to clean the calculator. Doing so can remove printed markings and can damage the case. E-6
  • Casio FC-200V | User Guide - Page 9
    and Off 10 kAdjusting Display Contrast 10 kAbout the Display 11 kDisplay Indicators 11 Calculation Modes and Calculator Setup .... 13 kCalculation Modes 13 kUsing the Setup Screen 13 Inputting Expressions and Values 23 kInputting a Calculation Expression Using Standard Format 23 kCorrecting
  • Casio FC-200V | User Guide - Page 10
    Financial Calculation 42 kSimple Interest Mode 42 kCompound Interest Mode 44 kCash Flow Mode 50 kAmortization Mode 55 kConversion Mode 59 kCost/Sell/Margin Mode 61 kDay Calculation Mode 64 kDepreciation Mode (FC-200V only 66 kBond Mode (FC-200V only 71 kBreak-Even Mode (FC-200V only 78
  • Casio FC-200V | User Guide - Page 11
    kStack Limitations 136 kCalculation Ranges, Number of Digits, and Precision 137 kSpecial Financial Calculation Error Messages .. 139 kError Messages 140 kBefore assuming malfunction of the calculator... 142 Reference 143 kPower Requirements and Battery Replacement 143 Specifications 146 E-9
  • Casio FC-200V | User Guide - Page 12
    On and Off • Press O to turn on the calculator. • Press 1A(OFF) to turn off the calculator. k Adjusting Display Contrast 1. Press s. 2. Use c to select "CONTRAST:EXE", and then press E. This displays the contrast adjustment screen. Use d and e to adjust display contrast. After the setting is the way
  • Casio FC-200V | User Guide - Page 13
    has a 31-dot × 96-dot LCD screen. Example: Input expression { Calculation result Financial Calculation Mode k Display Indicators Sample Display: STAT This indicator: Means this: Page: The keypad has been shifted by 7 pressing the 1 key. The keypad will unshift and this indicator
  • Casio FC-200V | User Guide - Page 14
    below the current screen. E-33 Disp The display currently shows an intermediate result of a multi-state- E-32 ment calculation. Important! • For a very complex calculation or some other type of calculation that takes a long time to execute, the display may show only the above indicators (without
  • Casio FC-200V | User Guide - Page 15
    Purchase price and annual yield calculations (FC-200V only) b E-71 Break-even point calculations (FC-200V only) B E-78 k Using the Setup Screen The setup screen lets you configure various conditions and screen settings used for calculations. You can also use the setup screen to adjust display
  • Casio FC-200V | User Guide - Page 16
    are the procedures you need to perform to access and use the setup screen using the above operations. Important! FC-200V All of the example procedures presented in this manual use the s key procedure to display the setup screen. To display the setup screen with the s key 1. Press the s key. This
  • Casio FC-200V | User Guide - Page 17
    use fc to select "Set:", and then press E. • This displays a setup screen of settings that apply to the current mode only. The content of the setup screen depends on what mode you are currently in. 2. Use fc interest calculation E-16 4 Periods/Y Number of payment periods per year E-17 5 Bond
  • Casio FC-200V | User Guide - Page 18
    2. Press 1(1:Begin) or 2(2:End) to select the setting you want. • You can also use fc to select a setting and then press E. 2 Date Mode: Simple Interest (SMPL) Mode, Day Calculation (DAYS) Mode, Bond (BOND) Mode (FC-200V only) This setting specifies the number of days in a year. 1:360 360 days 2:365
  • Casio FC-200V | User Guide - Page 19
    You can also use fc to select a setting and then press E. 5 Bond Date: Bond (BOND) Mode (FC-200V only) This setting specifies use of either a date (Date) or a number of payments (Term) as the term for bond calculations. 1:Date Date 2:Term Number of payments 1. Use fc to select "Bond Date", and then
  • Casio FC-200V | User Guide - Page 20
    6 Date Input: Day Calculation (DAYS) Mode, Bond (BOND) Mode (FC-200V only) This setting specifies either month, day, year (MDY) or day, month, year (DMY) as the date format. 1:MDY Month, day, year 06012006 (June 1, 2006) 2:DMY Day, month, year 01062006 (June 1, 2006) 1. Use fc to select "Date Input
  • Casio FC-200V | User Guide - Page 21
    type of 3-digit separator should be used. Note that the 3-digit separator is not displayed after you specify a number of significant digits with @ Sci. 1:Superscript 2:Subscript 3:Off Superscript comma 123´456 Subscript comma 123,456 Separator off 123456 1. Use fc to select "Digit Sep.", and then
  • Casio FC-200V | User Guide - Page 22
    want. • You can also use fc to select a setting and then press E. ! Fix: All modes This setting specifies a fixed number of digits to the right of the decimal place. Calculation results are rounded off to the specified number of digits before being displayed. • Changing this setting automatically
  • Casio FC-200V | User Guide - Page 23
    200 = 5 × 10-3 (Norm1) = 0.005 (Norm2) 1. Use fc to select "Norm", and then press E. 2. Press 1(Norm1) or 2(Norm2). $ STAT: Statistics (STAT) Mode, Cash Flow (CASH) Mode This setting controls whether a frequency (FREQ) column is included in the STAT Mode DataEditor. • The Cash Flow (CASH) Mode uses
  • Casio FC-200V | User Guide - Page 24
    , the cursor mark displayed on the upper right of a screen cannot be used. A Initializing the Setup Screen Settings 1. O19(CLR) 2. "Setup:EXE" (fc), then E. 3. E(Yes) 4. A • To cancel initialization without doing anything, press E(Cancel) instead of E(Yes). • The calculator will automatically enter
  • Casio FC-200V | User Guide - Page 25
    Calculation Expression Using Standard Format Your calculator lets you input calculation expressions just as they are written. Then simply press the E key to execute it. The calculator automatically judges the calculation (fc), then E. 3. 30)E • Some commonly used functions can also be input using a
  • Casio FC-200V | User Guide - Page 26
    can omit one or more closed parentheses that come at the end of a calculation, immediately before the E key is pressed. For details, see "Omitting a Final Closed Parenthesis" on page E-29. A Displaying a Long Expression The display can show up to 14 characters at a time. Inputting the 15th character
  • Casio FC-200V | User Guide - Page 27
    (I) or horizontal ( ) flashing line on the display screen. When there are 10 or fewer bytes of input remaining in the current expression, the cursor changes shape to I to let you know. If the I cursor appears, terminate the expression at a convenient point and calculate the result. • Each expression
  • Casio FC-200V | User Guide - Page 28
    or Function Example: To correct the expression 369 × × 12 so it becomes 369 × 12 Insert Mode: 369**12 dd Y Overwrite Mode: 369**12 ddd Y A Correcting a Calculation Example: To correct cos(60) so it becomes sin(60) Insert Mode: 12(cos)60) dddY 11(sin) Overwrite Mode: 12(cos)60) dddd 11
  • Casio FC-200V | User Guide - Page 29
    A Inserting input into a Calculation Always use the insert mode for this operation. Use d or e to move the cursor to the location where you want to insert new input, and then input what you want. k Displaying the Location of an Error If an error message (like "Math ERROR" or "Syntax ERROR") appears
  • Casio FC-200V | User Guide - Page 30
    in the COMP Mode (g). k Arithmetic Calculations Use the +, -, *, and / keys to perform arithmetic calculations. Example: 7 × 8 - 4 × 5 = 36 7*8-4*5E • The calculator automatically judges the calculation priority sequence. For more information, see "Calculation Priority Sequence" on page E-134
  • Casio FC-200V | User Guide - Page 31
    ( ) ) immediately preceding operation of the E key at the end of a calculation. Example: (2 + 3) × (4 - 1) = 15 (2+3)* (4-1E k Percent Calculations Example 1: 2% = 0.02 21((%)E Example 2: 150 × 20% = 30 150*20 1((%)E Example 3: To calculate what percentage of 880 is 660. 660/880 1((%)E Example 4: To
  • Casio FC-200V | User Guide - Page 32
    Example 5: To discount 3500 by 25%. 35003500* 251((%)E Example 6: To discount the sum of 168, 98, and 734 by 20%. 168+98+ 734E -G*201((%)E Example 7: If 300 grams are added to a test sample originally weighing 500 grams, what is the percentage increase in weight? 300+500 1.(A%) Example 8: What is
  • Casio FC-200V | User Guide - Page 33
    Example 9: To calculate the selling price and profit when the purchase price is $480 and the profit rate to the selling price is 25%. 480*25 1.(A%) 480/25 1.(A%) Example 10: To calculate the bargain price and loss when the purchase price is $130 and the loss rate is 4%. 130*y4 1.(A%) 130/y4 1.(A%)
  • Casio FC-200V | User Guide - Page 34
    in Calculations You can use the colon character (:) to connect two or more expressions and execute them in sequence from left to right when you press E. Example: To create a multi-statement that performs the following two calculations: 3 + 3 and 3 × 3 Insert Mode: 1. 3+3 2. t 3. " : " (fc), then
  • Casio FC-200V | User Guide - Page 35
    execute, and its result. You can use calculation history memory in the COMP Mode (g) only. A Recalling Calculation History Memory Contents Press f to back-step through calculation history memory contents. Calculation history memory shows both calculation expressions and results. Example: 1+1E
  • Casio FC-200V | User Guide - Page 36
    A Replay Function While a calculation result is on the display, you can press d or e to edit the expression you used for the previous calculation. Example: 4 × 3 + 2.5 = 14.5 4 × 3 - 7.1 = 4.9 4*3+2.5E A d YYYY -7.1E E-34
  • Casio FC-200V | User Guide - Page 37
    to or subtracted from independent memory. The "M" display indicator indicates data in independent memory. Variables Six variables named A, B, C, D, X, and Y can be used for storage of individual values. VARS The following are the names of the financial calculation variables: n, I, PV, PMT, FV
  • Casio FC-200V | User Guide - Page 38
    A Using Answer Memory to Perform a Series of Calculations Example: To divide the result of 3 × 4 by 30 3*4E (Continuing)/30E Pressing / automatically inputs "Ans" command. • With the above procedure, you need to perform the second calculation immediately after the first one. If you need to recall
  • Casio FC-200V | User Guide - Page 39
    using independent memory. To do this: Perform this key operation: Add the displayed value or result of the expression to m independent memory Subtract the displayed ) 2. 1t(STO) 3. "M:"(fc), then E. 4. E(Yes) • You can also store financial calculation value in independent memory. Example:
  • Casio FC-200V | User Guide - Page 40
    memory contents are maintained even if you press the A key, change the calculation mode, or turn off the calculator. A Calculation Examples Using Independent Memory • If the "M" indicator is on the display, perform the procedure under "Clearing Independent Memory" before performing this example
  • Casio FC-200V | User Guide - Page 41
    Use variable B Sn(A)*So(B)E • You can also assign a financial calculation value to a variable. Example: In the CMPD Mode, calculation mode, or turn off the calculator. Example: 9 × 5 6 × + 8 3 = 1.425 1. 9*6+3 2. 1t(STO) 3. "B:" (fc), then E. 4. E(Yes) 5. 5*8 6. 1t(STO) 7. "C:" (fc
  • Casio FC-200V | User Guide - Page 42
    variables, and are referred to as such in the section explaining the COMP Mode. A To select an financial calculation variable in the COMP mode 1. Press 1t(VARS). 2. On the menu screen that appears, use fc to move the highlighting to the variable you want to select, and then press E. A Clearing the
  • Casio FC-200V | User Guide - Page 43
    Memory Contents Use the following procedure to clear the contents of Answer Memory, independent memory, and all of the variables. This procedure does not clear VARS memory contents. See "Clearing the Contents of VARS Memories Only" for more information. 1. O19(CLR) 2. "Memory:EXE" (fc), then
  • Casio FC-200V | User Guide - Page 44
    Financial Calculation k Simple Interest Mode • The Simple Interest (SMPL) Mode lets you calculate the interest amount and/or simple future value (principal and interest amount). A Entering the SMPL Mode • Press S to enter the SMPL Mode. Value Input Screen A Setting Values No. Display Name 1 Set*
  • Casio FC-200V | User Guide - Page 45
    • Press 2 to select "365". • Use fc to select 2 "Dys", input 120, and then press E. • Use fc to select 3 "I", input 5, and then press E. • Use fc to select 4 "PV", input 10000, and then press E. 2. Select the value you want to calculate. • For this example, use fc to select "ALL: Solve". 3. Press 9
  • Casio FC-200V | User Guide - Page 46
    operation may change the values assigned to them. • Though SMPL Mode variables are financial calculation variables, they are also used by arithmetic and function operations in the COMP Mode. A Calculation Formulas 365-day Mode SI' = Dys 365 × PV × i i = I% 100 360-day Mode SI
  • Casio FC-200V | User Guide - Page 47
    A Setting Values No. Display Name 1 Set*1 Payment Period (Payment) Values Used in Examples End 2n Number of Payments 48 3 the case of compound interest calculations, you can also use the compound interest mode (dn) setting on the setup screen for interest calculations of odd (partial) months
  • Casio FC-200V | User Guide - Page 48
    "PMT", input -300, and then press E. • Use fc to select 7 "P/Y", input 12, and then press E. • Use fc to select 8 "C/Y", input 12, and then press E. Input Precautions • Before specifying the number of months when there is a partial month, see "Calculating the Number of Months when a Partial Month is
  • Casio FC-200V | User Guide - Page 49
    Partial Month is Included The following example shows how to calculate the number of months (number of days/total days in P/Y=12, n can be thought of as being the payment period (number of months). 1. Use fc to select "n". 2. Input the division operation that divides the number of days in the partial
  • Casio FC-200V | User Guide - Page 50
    Settings (page E-16) to select either compound interest or simple interest for the dn setting. A CMPD Mode Financial Calculation Variables (VARS) • Variables n, I, PV, PMT, FV, P/Y, and C/Y are used in the CMPD Mode. • The values of CMPD Mode variables are retained even if you change to another
  • Casio FC-200V | User Guide - Page 51
    (1 + I % )P/Y -1..... (Other than 100 × [C/Y ] those above) u I% i (effective interest rate) i (effective interest rate) is calculated using Newton's Method. γ × PV + α × PMT + β × FV = 0 To I % from i (effective interest rate) {{ } i × 100 P/Y = C/Y = 1) I% = P/Y (1 + i ) C/Y -1 × C/Y × 100
  • Casio FC-200V | User Guide - Page 52
    back to "=". k Cash Flow Mode • The Cash Flow (CASH) mode calculates the total of income and expenses over a fixed period, and then uses the discounted cash flow (DCF) method to perform investment appraisal. The following four items are appraised. NPV : Net Present Value IRR : Internal Rate of
  • Casio FC-200V | User Guide - Page 53
    CF0 With this graph, the initial investment amount is represented by CF0. The cash flow one year later is shown by CF1, two years later by CF2, and so on. A Setting Values No. Display Name 1 I Annual Interest Values Used in Examples 3% A Receipt and Payment Summary Period CF0 CF1 CF2 CF3 CF4
  • Casio FC-200V | User Guide - Page 54
    input 3, and then press E. • Use fc to select "Csh =D.Editor x", and then press E. This displays the DataEditor. Only the x-column is used for calculation. Any values in the y-column and FREQ- column are not used. Note • The STAT editor and the D.Editor x of the CASH Mode use the same memory area to
  • Casio FC-200V | User Guide - Page 55
    you input while "2-VAR" is selected are cleared when "1-VAR" is selected in the STAT Mode. A CASH Mode Financial Calculation Variables (VARS) • Variable I is used in the CASH Mode. • The value of the CASH Mode variable is retained even if you change to another mode. Note, however, that I is also
  • Casio FC-200V | User Guide - Page 56
    a financial calculation variable, it is also used by arithmetic and function operations in the COMP Mode. A Calculation Formulas u NPV NPV = CF0 + CF1 (1+ i) + CF2 (1 + i )2 + CF3 (1 + i )3 + ... + CFn (1 + i )n I % i = 100 n: natural number up to 79 u NFV NFV = NPV × (1 + i )n u IRR
  • Casio FC-200V | User Guide - Page 57
    k Amortization Mode • The Amortization (AMRT) Mode lets you calculate the principal balance, and the interest portion and principal portion of monthly payments, as well as interest and principal amounts paid to date. BAL : Principal
  • Casio FC-200V | User Guide - Page 58
    PM1 to payment PM2 (ΣPRN) e : Total interest paid from payment PM1 to payment PM2 (ΣINT) A Setting Values No. Display Name 1 Set*1 Payment Period (Payment) Values Used in Examples End 2 PM1 Payment PM1 (Number of Payments) 15 3 PM2*2 Payment PM2 (Number of Payments) 28 4 n*3 Number
  • Casio FC-200V | User Guide - Page 59
    to input the minus sign. A Basic AMRT Mode Procedure Example 1: To calculate the principal balance (BAL) after payment 28 1. Input the values for 1, 2, 3, 5, 6, 7, 9, and 0 from the Setting Values table (page E-56). • For this example, use fc to select 1 "Set:", and then press E. • Press 2 to select
  • Casio FC-200V | User Guide - Page 60
    15 (PM1) to payment 28 (PM2) • In step 2 of the basic procedure (Example 1), select "ΣPRN:Solve". A AMRT Mode Financial Calculation Variables (VARS) • Variables PM1, PM2, n, I, PV, PMT, FV, P/Y, and C/Y are used in the AMRT Mode. • The values of AMRT Mode variables are retained even if you change to
  • Casio FC-200V | User Guide - Page 61
    and Effective Interest Rate The nominal interest rate (I % value input by user) is converted to an effective interest rate (I %´) for installment loans rate to the effective interest rate, and the result is used for all subsequent calculations. i = I%'÷100 k Conversion Mode • The Conversion (
  • Casio FC-200V | User Guide - Page 62
    Setting Values No. Display Name 1n 2I Number of Annual Compoundings Interest Rate (Annual) Values Used in Examples 6 3% use fc to select 1 "n", input 6, and then press E. • Use fc to select 2 "I", input 3, and then press E. 2. Select the value you want to calculate. • For this example, use fc
  • Casio FC-200V | User Guide - Page 63
    Example 1), select "APR: Solve". A CNVR Mode Financial Calculation Variables (VARS) • Variables n and I are used in the CNVR Mode. • A value is assigned Mode • The Cost/Sell/Margin (COST) Mode lets you calculate cost, selling price, or margin after inputting the other two values. You can input
  • Casio FC-200V | User Guide - Page 64
    Mode. Value Input Screen A Setting Values No. Display Name 1 CST 2 SEL 3 MRG Cost Selling Price Margin Values Used in Examples $40 $100 60% A Basic COST Mode Procedure Example 1: To calculate the margin (MRG) 1. Input the cost (CST) and selling price (SEL) values from the Setting Values table
  • Casio FC-200V | User Guide - Page 65
    Example 3: To calculate the selling price (SEL) based on margin and cost 1. Input the margin (MRG) and cost (CST) values in step 1 of the basic procedure (Example 1). 2. Select 2 "SEL" in step 2. A COST Mode Financial Calculation Variables (VARS) • Variables CST, SEL, and MRG are used in the COST
  • Casio FC-200V | User Guide - Page 66
    date. • Starting date (d1) and ending date (d2) calculations are possible within the range of January 1, 1901 through December 31 Display Name 1 Set*1 2 d1*2 3 d2*2 4 Dys Days in Year (Date Mode) Starting Date (Month, Day, Year) Ending Date (Month, Day, Year) Number of Days (Duration) Values Used
  • Casio FC-200V | User Guide - Page 67
    • For this example, use fc to select 1 "Set:", and then press E. • Press 2 to select "365". • Use fc to select 2 "d1", input 11052004, and then press E. • Use fc to select 3 "d2", input 04272005, and then press E. 2. Select the value you want to calculate. • For this example, use fc to select "Dys
  • Casio FC-200V | User Guide - Page 68
    them. • Though DAYS Mode variables are financial calculation variables, variable "Dys" can be recalled in the COMP Mode. k Depreciation Mode (FC-200V only) • The Depreciation (DEPR) Mode lets you use any of the four methods for depreciation. SL : Straight-Line Method FP : Fixed Percentage Method SYD
  • Casio FC-200V | User Guide - Page 69
    DEPR Mode. Value Input Screen A Setting Values No. Display Name 1n 2 I*1 3 PV 4 FV Useful Life Depreciation Ratio Factor Original Cost (Basis) Residual Book Value Values Used in Examples 6 25% 200 $150,000 $0 5j 6 YR1 Year for Calculation of Depreciation Cost Number of Months in the First
  • Casio FC-200V | User Guide - Page 70
    ", input 150000, and then press E. • Use fc to select 4 "FV", input 0, and then press E. • Use fc to select 5 " j ", input 3, and then press E. • Use fc to select 6 "YR1", input 2, and then press E. 2. Select the value you want to calculate. • For this example, use fc to select "SL:Solve". 3. Press
  • Casio FC-200V | User Guide - Page 71
    are financial calculation variables, they are also used by arithmetic and function operations in the COMP Mode. A Calculation Formulas Depreciation for an item acquired part way through a year can be calculated by month. u Straight-Line Method The straight-line method calculates depreciation
  • Casio FC-200V | User Guide - Page 72
    u Fixed Percentage Method Fixed percentage method can be used to calculate depreciation for a given period, or to calculate the depreciation rate. FP1 = PV × I% 100 × YR1 12 FPj = (RDVj-1 + FV ) × I% 100 FPn+1 = RDVn (YR1G12) RDV1 = PV - FV - FP1 RDVj = RDVj-1 - FPj RDVn+1 = 0 (YR1G12)
  • Casio FC-200V | User Guide - Page 73
    of j th year I% : factor k Bond Mode (FC-200V only) • The Bond (BOND) Mode lets you calculate purchase price and annual yield. A Entering the BOND Mode • Press b to enter the BOND Mode. Value Input Screen A Setting Values No. Display Name 1 Set*1 2 d1*2 Periods/Y Bond Date Purchase Date (Month
  • Casio FC-200V | User Guide - Page 74
    of a zero coupon, input 0 for CPN. *6 • When calculating the redemption price per $100 of face value (PRC), you can also calculate accrued interest (INT) and purchase price including accrued interest (CST). • Input money paid out as a negative value, using the y key to input the minus sign. E-72
  • Casio FC-200V | User Guide - Page 75
    of Date Mode is 365 (365-day year). See the "Date Mode" setting under "Configuring Settings" (page E-16). • To display the Setup screen, press s. A Basic BOND Mode Procedure Example 1: To calculate the bond purchase price (PRC) based on a specific date (Date) 1. Input the values required for the
  • Casio FC-200V | User Guide - Page 76
    press E. 2. Select the value you want to calculate. • For this example, use fc to select "PRC". 3. Press l to perform the calculation. • Pressing the E key returns to the value input screen. A Other BOND Mode Calculations • Before performing a calculation based on a specific number of payments (Term
  • Casio FC-200V | User Guide - Page 77
    d1 and d2 with input item n. 2. Use fc to select 4 "n", input 3, and then press E. 3. Input -97.61645734 for PRC, without inputting anything for YLD. 4. In step 2, select "YLD". A BOND Mode Financial Calculation Variables (VARS) • The values of the following BOND Mode variables are retained even if
  • Casio FC-200V | User Guide - Page 78
    A Calculation Formulas D A B Redemption date (d2) Issue date Purchase date (d1) Coupon Payment dates PRC : price per $100 of face value CPN : INT : accrued interest CST : price including interest u Price per $100 of face value (PRC) Date (Using the Setup Screen: Bond Date) • For one or
  • Casio FC-200V | User Guide - Page 79
    = PRC + INT Term (Using the Setup Screen: Bond Date) CPN RDV n M PRC = - -Σ (1+ YLD/100 ) n k=1 (1+ YLD/100 )k M M INT = 0 CST = PRC u Annual Yield (YLD) YLD is calculated using Newton's Method. Note • This calculator performs annual yield (YLD) calculations using Newton's Method, which
  • Casio FC-200V | User Guide - Page 80
    k Break-Even Mode (FC-200V only) • The Break-Even (BEVN) Mode has six sub-modes that you can use to perform various break-even point calculations. A Entering the BEVN Mode • Press B to enter the BEVN Mode. A BEVN Mode Sub-modes BEV: Break-even point sales quantity and sales amount, sales quantity
  • Casio FC-200V | User Guide - Page 81
    A Entering the BEV Sub-mode 1. Press B to enter the Break-Even Mode. 2. Use fc to select "BEV:EXE". 3. Press E. Value Input Screen A Setting Values No. Display Name 1 Set*1 2 PRC 3 VCU 4 FC 5 PRF*2 r%*2 6 QBE*3 SBE*3 Profit or Profit Ratio (PRF/Ratio) Sales Quantity or Sales Amount (B-Even)
  • Casio FC-200V | User Guide - Page 82
    input 100, and then press E. • Use fc to select 3 "VCU", input 50, and then press E. • Use fc to select 4 "FC", input 100000, and then press E. • Use fc to select 5 "PRF" or "r%", input 0, and then press E. 2. Select the value you want to calculate. • For this example, use fc to select 6 "QBE". E-80
  • Casio FC-200V | User Guide - Page 83
    procedure (Example 1). 2. In step 2, select "SBE". Example 7: To calculate other values besides sales quantity and sales amount • You can calculate any one of the following five values by inputting values the other four: 2 Sales Price, 3 Unit Variable Cost, 4 Fixed Cost, 5 Profit or Profit Ratio
  • Casio FC-200V | User Guide - Page 84
    -mode Financial Calculation Variables (VARS) • Variables PRC, VCU, FC, PRF, r%, QBE, and SBE are used in the BEV sub-mode. • BEV sub-mode variable contents are cleared whenever you change to another mode other than the BEVN Mode sub-modes (BEV, MOS, DOL, DFL, DCL, QTY CONV.). A Calculation Formulas
  • Casio FC-200V | User Guide - Page 85
    fc to select "MOS:EXE". 3. Press E. Value Input Screen A Setting Values No. Display Name 1 SAL Sales Amount Values Used in Examples $1,200,000 2 SBE Break-even Sales Amount $1,000,000 3 MOS Margin of Safety 0.1667(16.67%) A Basic MOS Sub-mode Procedure Example 1: To calculate the margin of
  • Casio FC-200V | User Guide - Page 86
    Financial Calculation Variables (VARS) • Variables SAL, SBE, and MOS are used in the MOS submode. • MOS sub-mode variable contents are cleared whenever you change to another mode other than the BEVN Mode sub-modes (BEV, MOS, DOL, DFL, DCL, QTY CONV.). A Calculation lets you calculate how profit
  • Casio FC-200V | User Guide - Page 87
    A Setting Values No. Display Name 1 SAL Sales Amount Values Used in Examples $1,200,000 2 VC Variable Cost $600,000 3 FC Fixed Cost $200,000 4 DOL Degree of Operating Leverage 1.5 A Basic DOL Sub-mode Procedure Example 1: To calculate the degree of operating leverage (DOL) 1. Input the
  • Casio FC-200V | User Guide - Page 88
    of Financial Leverage (DFL) sub-mode lets you calculate the influence of interest on earnings before interest and taxes (EBIT). A Entering the DFL Sub-mode 1. Press B to enter the Break-Even Mode. 2. Use fc to select "DFL:EXE". 3. Press E. Value Input Screen A Setting Values No. Display Name
  • Casio FC-200V | User Guide - Page 89
    , use fc to select 3 "DFL". 3. Press l to perform the calculation. A Other DFL Sub-mode Calculations Example 2: To calculate earnings before interest and taxes (EBIT), and interest (ITR) • Use the basic procedure (Example 1), substituting the required values. A DFL Sub-mode Financial Calculation
  • Casio FC-200V | User Guide - Page 90
    Press B to enter the Break-Even Mode. 2. Use fc to select "DCL:EXE". 3. Press E. Value Input Screen A Setting Values No. Display Name 1 SAL Sales Amount Values Used in Examples $1,200,000 2 VC Variable Cost $600,000 3 FC 4 ITR Fixed Cost Interest $200,000 $100,000 5 DCL Degree of Combined
  • Casio FC-200V | User Guide - Page 91
    the sales amount (SAL), variable cost (VC), fixed cost (FC), and interest (ITR) • Use the basic procedure (Example 1), substituting the required values. A DCL Sub-mode Financial Calculation Variables (VARS) • Variables SAL, VC, FC, ITR, and DCL are used in the DCL sub-mode. • DCL sub-mode variable
  • Casio FC-200V | User Guide - Page 92
    amount, sales price, or sales quantity after inputting the other two values. • You can also calculate the variable cost, unit variable cost, or sales quantity after inputting the other two values. A Entering the QTY CONV. Sub-mode 1. Press B to enter the Break-Even Mode. 2. Use fc to select "QTY
  • Casio FC-200V | User Guide - Page 93
    price 1. Input the required values from among 1, 2, and 3 in the Setting Values table above. • In this example, use fc to select 1 "SAL", input 100000, and then press E. • Use fc to select 2 "PRC", input 200, and then press E. 2. Select the value you want to calculate. • In this example, use fc
  • Casio FC-200V | User Guide - Page 94
    use fc to select 4 "VC", input 15000, and then press E. • Use fc to select 5 "VCU", input 30, and then press E. 2. Select the value you want to calculate. • In this example, use fc CONV. Sub-mode Financial Calculation Variables (VARS) • Variables SAL, PRC, QTY, VC, and VCU are used in the QTY CONV
  • Casio FC-200V | User Guide - Page 95
    A Calculation Formulas SAL = PRC × QTY VC = VCU × QTY SAL : Sales Amount PRC : Sales Price QTY : Sales Quantity VC : Variable Cost VCU : Unit Variable Cost E-93
  • Casio FC-200V | User Guide - Page 96
    the same calculation or input the same data. A Using Shortcut Keys Example: To configure the shortcut keys to simplify calculation of the and C/Y. • See "Compound Interest Mode" (page E-44) for more information. 3. Use fc to select "n". 4. Press 1t(STO). • A number sign (#) next to "Shortcut1"
  • Casio FC-200V | User Guide - Page 97
    5. Use fc to select STO "Shortcut1", and then press E. 6. In response to PV) + (-PMT) × n)) × 0.9 + ((-PV) + (-PMT) × n) • "FV", "PV" and "n" are financial calculation variables (VARS). 3. Perform the same operation as steps 4, 5, and 6 under "To configure the SHORTCUT1 key" to assign the above
  • Casio FC-200V | User Guide - Page 98
    3. Use fc to select "FV", and then press l to perform the calculation. • This calculates the future value of the investment after five years. The result appears on the display and is stored in Answer Memory (Ans). 4. Press 2(Shortcut2). • This recalls the formula (for calculating tax) assigned to
  • Casio FC-200V | User Guide - Page 99
    E instead of E in step 5. u To use the configured function memory key in a calculation Example: To recall the inverse sin function assigned to the FMEM1 key • Press 11(FMEM1). A Initializing the Function Shortcut Settings 1. O19(CLR) 2. "FMEM:EXE" (fc), then E. 3. 1(FMEM1) or 2(FMEM2) 4. A E-97
  • Casio FC-200V | User Guide - Page 100
    t will display a menu of functions that you can use to select the one you want to input. You can also use a direct key operation to input the following functions. FC-200V Rnd(, sin(, cos(, tan(, x2, '(, ^(, e^(, ln( FC-100V Rnd(, sin(, cos(, tan(, e^(, 10^(, ^(, ln(, log(, x'( All calculations in
  • Casio FC-200V | User Guide - Page 101
    Functions Example: sinh 1 = 1.175201194, cosh-1 1 = 0 1. t 2. "sinh" (fc), then E. 3. 1)E 1. t 2. "cosh-1" (fc), then E. 3. 1)E k Converting an Input Value to the Calculator's Default Angle Unit After inputting a value, press 1G(DRG') to display the angle unit specification menu shown below. Press
  • Casio FC-200V | User Guide - Page 102
    2. "cos-1" (fc), then E. 3. y1)E Z 1. t 2. "cos-1" (fc), then E. 3. y1)E k Exponential Functions and Logarithmic Functions • For the logarithmic function "log(", you can specify base m using the syntax "log (m, n)". If you input only a single value, a base of 10 is used for the calculation. • "ln
  • Casio FC-200V | User Guide - Page 103
    16)E A base of 10 (common logarithm) is used if no base is specified. Example 3: ln 90 (= loge90) = 4.49980967 1. t 2. "ln(" (fc), then E. 3. 90)E Example 4: ln e = 1 1. t 2. "ln(" (fc), then E. 3. S5(e))E Example 5: e10 = 22026.46579 1. t 2. "e^(" (fc), then E. 3. 10)E k Power Functions and Power
  • Casio FC-200V | User Guide - Page 104
    2t 2. "3" (fc), then E. 3. E Example 4: ('2 + 1) ('2 - 1) = 1 1. (t 2. " '(" (fc), then E. 3. 2)+1)(t 4. " '(" (fc), then E. 5. 2)-1)E Example 5: 5 32 = 2 1. 5t 2. " x'(" (fc), then E. 3. 32)E Example 6: 3'5 + 3 -27 = -1.290024053 1. t 2. " 3'(" (fc), then E. 3. 5)+t 4. " 3'(" (fc), then E. 5. y27
  • Casio FC-200V | User Guide - Page 105
    rectangular coordinate X value Y: Specifies the rectangular coordinate Y value • Calculation result θ is displayed in the range of -180° < θ < 180°. • Calculation result θ is displayed using the calculator's default angle unit. • Calculation result r is assigned to variable X, while θ is assigned to
  • Casio FC-200V | User Guide - Page 106
    ), then E. 3. 15(')2) 1)(,)15(') 2))E Example 2: (r, θ) = (2, 30) → (X, Y) z 1. t 2. " Rec(" (fc), then E. 3. 21)(,)30)E k Other Functions This section explains how to use the functions shown below. !, Abs(, Ran#, nPr, nCr, Rnd( A Factorial (!) This function obtains the factorials of a value that is
  • Casio FC-200V | User Guide - Page 107
    (Abs) When you are performing a real number calculation, this function simply obtains the absolute value. Example: Abs (2 - 7) = 5 1. t 2. "Abs(" (fc), then E. 3. 2-7)E A Random Number (Ran#) This function generates a 3-digit pseudo random number that is less than 1. Example: To generate three
  • Casio FC-200V | User Guide - Page 108
    and combination calculations. n and Display Digits Setting: Norm1 or Norm2 The mantissa is rounded to 10 digits. Display Digits Setting: Fix or Sci The value is rounded to the specified number of digits. Example: 200 ÷ 7 × 14 = 400 200/7*14E (Specifies three decimal places.) 1. s FIX 2. "Fix" (fc
  • Casio FC-200V | User Guide - Page 109
    (Calculation is performed internally using 15 digits.) FIX 200/7E FIX *14E The following performs the same calculation with rounding. FIX 200/7E (Round the value to the specified number of digits.) FIX 10(Rnd)E (Check rounded result.) FIX *14E E-107
  • Casio FC-200V | User Guide - Page 110
    a Statistical Calculation Type In the STAT Mode, display the statistical calculation type selection screen. k Statistical Calculation Types Use fc to select the STAT Mode from another mode. Use the STAT menu to select a statistical calculation type. To display the STAT editor screen from another
  • Casio FC-200V | User Guide - Page 111
    where the cursor is located. Use fcde to move the cursor between calculation history memory, multi-statement input, and assignment to financial calculation variables. • Pressing A while inputting data clears your current input. • After inputting a value, press E. This registers the value and displays
  • Casio FC-200V | User Guide - Page 112
    Display OFF Statistic Type (No FREQ column) Single-variable 80 lines Paired-variable 40 lines ON (FREQ column) 40 lines 26 lines • The following types of input are not allowed on the STAT editor screen. • m, 1m(M-) operations • Assignment to variables (STO) • Financial Calculation
  • Casio FC-200V | User Guide - Page 113
    the maximum number of lines allowed for the STAT editor screen are already used. Deleting All STAT Editor Line" and "Deleting All STAT Editor Contents" only when the STAT editor screen is on the display. k STAT Calculation Screen The STAT calculation screen is for performing statistical calculations
  • Casio FC-200V | User Guide - Page 114
    the Edit sub-menu for editing STAT editor screen contents 4Sum Display the Sum sub-menu of commands for calculating sums 5Var Display the Var sub-menu of commands for calculating the mean, standard deviation, etc. 6MinMax Display the MinMax sub-menu of commands for obtaining maximum and
  • Casio FC-200V | User Guide - Page 115
    select 4(Sum), 5(Var) or 6(MinMax) on the STAT menu while a single-variable statistical calculation type is selected. Calculation formula used for each command o = Σx n xσn = Σ (x - o)2 n xσn -1 = the sample data 3xσn Population standard deviation 4xσn-1 Sample standard deviation E-113
  • Casio FC-200V | User Guide - Page 116
    1minX Minimum value 2maxX Maximum value Single-variable Statistical Calculation Example 1: To select single-variable (1-VAR) and "STAT" (fc), then E. 3. 1(On) 7 STAT E(1-VAR) 1E 2E 3E 4E STAT 5E 6E 7E 8E 9E 10E STAT A Example 2: To edit the data to the following, using insert and delete
  • Casio FC-200V | User Guide - Page 117
    following: {1, 2, 1, 2, 2, 2, 3, 4, 2, 1} (FREQ: ON) STAT 17(S-MENU)2(Data)e STAT c2E c2E 2E 2E 3E 4E 2E STAT A • Examples 4 through 7 all use the same data as Example 3. Example 4: To calculate sum of squares of the sample data and sum of the sample data. 17(S-MENU)4(Sum) STAT 1(Σx2)E E-115
  • Casio FC-200V | User Guide - Page 118
    STAT 17(S-MENU)4(Sum) 2(Σx)E Example 5: To calculate number of samples, mean, and population standard deviation. 17(S-MENU)5(Var) STAT 1(n)E STAT 17(S-MENU)5(Var) 2(o)E STAT 17(S-MENU)5(Var) 3(xσn)E Example 6: To calculate minimum value and maximum value. 17(S-MENU)6(MinMax) STAT 1(minX)E STAT 17(S-
  • Casio FC-200V | User Guide - Page 119
    linear regression is selected as the statistical calculation type. Calculation formula used for each command o = Σx n xσn = Σ (x - o)2 n xσn -1 = p = Σy n Σ (x - o)2 n - 1 yσn = Σ (y - p)2 n yσn -1 = Σ (y - p)2 n - 1 A = Σy - B.Σx n B = n.Σxy - n.Σx2 - Σx.Σy (Σ x)2 r = n.Σxy
  • Casio FC-200V | User Guide - Page 120
    of samples 2o Mean of the X-data 3xσn Population standard deviation of the X-data 4xσn-1 Sample standard deviation of the X-data 5p Mean of the Y-data 6yσn Population standard deviation of the Y-data 7yσn-1 Sample standard deviation of the Y-data MinMax Sub-menu (17(S-MENU)6(MinMax
  • Casio FC-200V | User Guide - Page 121
    5n Estimated value of y Linear Regression Calculation • Examples 8 through 10 all use the data input in Example 7. Example 7: x y x y 1.0 1.0 1.2 1.1 2.1 1.5 2.4 1.6 1.5 1.2 1.6 1.3 2.5 1.7 2.7 1.8 1.9 1.4 3.0 2.0 1. s 2. "STAT" (fc), then E. 3. 2(Off) 7 STAT cE(A+BX
  • Casio FC-200V | User Guide - Page 122
    STAT ce1E 1.1E 1.2E 1.3E 1.4E STAT 1.5E 1.6E 1.7E 1.8E 2E STAT A Example 8: 17(S-MENU)4(Sum) STAT 5(Σxy)E 17(S-MENU)5(Var) STAT 3(xσn)E 17(S-MENU) 6(MinMax) STAT 4(maxY)E E-120
  • Casio FC-200V | User Guide - Page 123
    10: Estimated Value (y = -3 → m = ?) STAT y317(S-MENU) 7(Reg)4(m)E Estimated Value (x = 2 → n = ?) STAT 217(S-MENU) 7(Reg)5(n)E A Commands when Quadratic Regression Calculation (_+CX2) Is Selected With quadratic regression, regression is performed in accordance with the following model equation
  • Casio FC-200V | User Guide - Page 124
    Calculation formula used for each command ( ) ( ) Σy Σx Σx2 A= n -B n -C n Sxy.Sx2x2 - Sx2y.Sxx2 B = Sxx.Sx2x2 - (Sxx )2 2 Sx2y.Sxx - Sxy.Sxx2 C = Sxx.Sx2x2 - (Sxx2)2 Sxx = Σx2- (Σx)2 n Sxy = Σxy - (Σx.Σy) n Sxx2 = Σx3 - (Σx.Σx2) n
  • Casio FC-200V | User Guide - Page 125
    (sums), Var sub-menu (number of samples, mean, standard deviation), and MinMax submenu (maximum value, minimum value) operations are the same those for linear regression calculations. Quadratic Regression Calculation • Examples 11 through 13 all use the data input in Example 7 (page E-119). Example
  • Casio FC-200V | User Guide - Page 126
    formula of the command included in each regression type, refer to the indicated calculation formulas. Statistical Calculation Type Model Equation Logarithmic Regression (ln X) y = A + Bln X e Exponential Regression (e^X) y = AeBX ab Exponential Regression (A•B^X) y = ABX Power Regression
  • Casio FC-200V | User Guide - Page 127
    Logarithmic Regression (ln X) Σy - B.Σlnx A = n n.Σ(lnx)y - Σlnx.Σy B = n.Σ(lnx)2 - (Σlnx)2 r = n.Σ(lnx)y - Σlnx.Σy {n.Σ(lnx)2 - (Σlnx)2}{n.Σy2 - (Σy)2} y - A m=e B n = A + Blnx e Exponential Regression (e^X) ( ) A = exp Σlny - B.Σx n n.Σxlny - Σx.Σlny B = n.Σx2 - (Σx)2 r = n.Σxlny -
  • Casio FC-200V | User Guide - Page 128
    Power Regression (A•X^B) ( ) A = exp Σlny - B.Σlnx n n.Σlnxlny - Σlnx.Σlny B = n.Σ(lnx)2 - (Σlnx)2 r = n.Σlnxlny - Σlnx.Σlny {n.Σ(lnx)2 - (Σlnx)2}{n.Σ(lny)2 - (Σlny)2} ln y - ln A m=e B n = AxB Inverse Regression (1/X) Σy - B.Σx-1 A = n Sxy B = Sxx r = Sxy Sxx .Syy Sxx = Σ(x-1)2 -
  • Casio FC-200V | User Guide - Page 129
    Comparison of Regression Curves • The following example uses the data input in Example 7 (page E-119). Example 14: To compare the correlation coefficient for logarithmic, e exponential, ab exponential, power, and inverse regression. (FREQ: OFF)
  • Casio FC-200V | User Guide - Page 130
    Other Types of Regression Calculation Example 15: y = A + Blnx x y 1. s 29 1.6 2. "STAT" (fc), then E. 50 23.5 3. 2(Off) 74 38.0 103 46.4 118 48.9 7cccE(ln X) STAT 29E 50E 74E 103E 118E ce1.6E STAT 23.5E 38E 46.
  • Casio FC-200V | User Guide - Page 131
    Example 16: y = AeBx x y 1. s 6.9 21.4 2. "STAT" (fc), then E. 12.9 15.7 3. 2(Off) 19.8 12.1 26.7 8.5 35.1 5.2 7ccccE(e^X) 6.9E 12.9E STAT 19.8E 26.7E 35.1E ce21.4E STAT 15.7E 12.
  • Casio FC-200V | User Guide - Page 132
    Example 17: y = ABx x y 1. s -1 0.24 2. "STAT" (fc), then E. 3 4 3. 2(Off) 5 16.2 10 513 7cccccE(A•B^X) STAT y1E 3E 5E 10E STAT ce0.24E 4E 16.2E 513E STAT A17(S-MENU) 7(Reg)1(A)E STAT 17(S-MENU) 7(
  • Casio FC-200V | User Guide - Page 133
    Example 18: y = AxB x y 1. s 28 2410 2. "STAT" (fc), then E. 30 3033 3. 2(Off) 33 3895 35 4491 38 5717 7ccccccE(A•X^B) STAT 28E 30E 33E 35E 38E ce2410E 3033E STAT 3895E 4491E 5717E STAT A17(S-
  • Casio FC-200V | User Guide - Page 134
    Example 19: y = A + -Bx- x y 1. s 1.1 18.3 2. "STAT" (fc), then E. 2.1 2.9 9.7 6.8 3. 2(Off) 4.0 4.9 4.9 4.1 7cccccccE(1/X) 1.1E 2.1E STAT 2.9E 4E 4.9E ce18.3E STAT 9.7E 6.8E 4.9E 4.1E STAT A17(S-MENU) 7(Reg)1(A)E STAT 17(S-MENU) 7(Reg)2(B)E STAT
  • Casio FC-200V | User Guide - Page 135
    A Command Usage Tips • The commands included in the Reg sub-menu can take a long time to execute in logarithmic, e exponential, ab exponential, or power regression calculation when there are a large number of data samples. E-133
  • Casio FC-200V | User Guide - Page 136
    : Multiplication sign omitted immediately before π, e, variables (2π, 5A, πA, etc.), functions with parentheses (2'(3), Asin(30), etc.) 7. Addition and subtraction: +, - If a calculation contains a negative value, you may need to enclose the negative value in parentheses. If you want to square the
  • Casio FC-200V | User Guide - Page 137
    left to right when both types are mixed in the same calculation. Enclosing an operation within parentheses causes it to be performed first, so the use of parentheses can result in different calculation results. Example: 1 ÷ 2π = 1.570796327 1 ÷ (2π) = 0.1591549431 1/215(π)E 1/(215(π)) E E-135
  • Casio FC-200V | User Guide - Page 138
    k Stack Limitations This calculator uses memory areas called stacks to temporarily store lower calculation priority sequence values, commands, and functions. The numeric stack has 10 levels and the command stack has 24 levels, as shown in the illustration below. 1
  • Casio FC-200V | User Guide - Page 139
    Range ±1 × 10-99 to ±9.999999999 × 1099 or 0 Number of Digits for 15 digits Internal Calculation Precision In general, ±1 at the 10th digit for a single calculation. Precision for exponential display is ±1 at the least significant digit. Errors are cumulative in the case of consecutive
  • Casio FC-200V | User Guide - Page 140
    Range and Precision" on page E-137. • ^(xy), x'y, 3', x!, nPr, nCr type functions require consecutive internal calculation, which can cause accumulation of errors that occur with each calculation. • Error is cumulative and tends to be large in the vicinity of a function's singular point and
  • Casio FC-200V | User Guide - Page 141
    "PMT", "FV" are the same sign Math ERROR n < 0 Math ERROR When calculating "PV", "PMT", "FV" I < -100 Math ERROR Cash Flow Mode When calculating "NPV" I < -100 Math ERROR When calculating "IRR" Calculated "IRR" is IRR < -50 .......... Math ERROR All Receipt/Payment values are the same sign Math
  • Casio FC-200V | User Guide - Page 142
    input, or whenever any other similar problem occurs. A When an error message appears... The following are general operations you can use when any error message appears. • Pressing d or e displays to the calculation expression editing screen you were using before the error message appeared, with
  • Casio FC-200V | User Guide - Page 143
    splitting the calculation into two or more parts. Syntax ERROR Cause • There is a problem with the format of the calculation you are performing the calculation into smaller parts. • Normally the input cursor appears as a straight vertical (I) or horizontal ( ) flashing line on the display screen.
  • Casio FC-200V | User Guide - Page 144
    . 2. Make sure that you are using the correct mode for the type of calculation you are trying to perform. 3. If the above steps do not correct your problem, press the O key. This will cause the calculator to perform a routine that checks whether calculation functions are operating correctly. If the
  • Casio FC-200V | User Guide - Page 145
    FC-200V Your calculator uses a TWO WAY POWER system that combines a solar cell with G13 type button battery (LR44). Normally, calculators lets you continue to use the calculator as long as there is enough light to read the display. A Replacing the Battery Dim display figures when available lighting
  • Casio FC-200V | User Guide - Page 146
    . See "Initializing the Calculator" (page E-3) for more information. FC-100V This calculator is powered by a single AAA-size battery (R03 (UM-4)). A Replacing the Battery Dim figures on the display of the calculator indicate that battery power is low. Continued use of the calculator when the battery
  • Casio FC-200V | User Guide - Page 147
    place with its screws. 6. Perform the following key operation: (1) O19(CLR) (2) "All:EXE" (fc), then E (3) E(Yes) (4) A • Make sure you perform the above key operation. Do not skip it. Auto Power Off Your calculator will turn off automatically if you do not perform any operation for about six
  • Casio FC-200V | User Guide - Page 148
    Specifications FC-200V Power Requirements: Solar Cell: Built into the front of the calculator Button Battery: G13 Type (LR44) × 1 Battery Life: Approximately 3 Case FC-100V Power Requirements: AAA-size battery: R03 (UM-4) × 1 Battery Life: Approximately 17,000 hours (continuous display of
  • Casio FC-200V | User Guide - Page 149
    CASIO COMPUTER CO., LTD. 6-2, Hon-machi 1-chome Shibuya-ku, Tokyo 151-8543, Japan SA0904-E
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
FC-200V
FC-100V
User's Guide
E
CASIO Worldwide Education Website
CASIO EDUCATIONAL FORUM