Casio TE-3000S User's Manual - Page 13
Step 1, Step 2, Step 3, Complete, Step 5, Step 4, Step 6 - te 3000
View all Casio TE-3000S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Getting Started To install receipt paper REG2 X1 REG1 Z1 Step 1 OFF X2/Z2 Turn the mode switch to REG1 position. RF PGM Step 2 Remove the printer cover. (If the cover is locked, unlock by using the printer cover key before this step.) Step 3 Open the platen arm. Step 4 Ensuring the paper is being fed from the bottom of the roll, lower the roll into the space behind the printer. Step 5 Put the leading end of the paper over the printer. Step 6 Close the platen arm slowly until it locks steadily. Locking platen Complete Close the printer cover, passing the leading end of the paper through the cutter slot. TE-3000S User's Manual 13 E
Getting Started
TE-3000S User’s Manual
13
E
Step 1
Turn the mode switch to
REG1 position.
Step 2
Remove the printer cover.
(If the cover is locked, unlock
by using the printer cover key
before this step.)
Step 3
Open the platen arm.
Complete
Close the printer cover,
passing the leading end of the
paper through the cutter slot.
Step 5
Put the leading end of the
paper over the printer.
To install receipt paper
REG2
X1
REG1
Z1
OFF
X2/Z2
RF
PGM
Step 4
Ensuring the paper is being
fed from the bottom of the
roll, lower the roll into the
space behind the printer.
Step 6
Close the platen arm slowly
until it locks steadily.
Locking platen