Casio TE-3000S User's Manual - Page 14
Step 1, Step 2, Step 3, Step 4, Step 5, Step 6, Step 7, Step 8, Step 9, Complete
View all Casio TE-3000S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Getting Started To install journal paper REG2 X1 REG1 Z1 Step 1 OFF RF PGM X2/Z2 Turn the mode switch to REG1 position. Step 2 Remove the printer cover. (If the cover is locked, unlock by using the printer cover key before this step.) Step 3 Open the platen arm. E 14 Step 4 Ensuring the paper is being fed from the bottom of the roll, lower the roll into the space behind the printer. Step 5 Put the leading end of the paper over the printer. Step 6 Close the platen arm slowly until it locks steadily. Locking platen Step 7 Slide the leading end of the paper into the groove on the spindle of the take-up reel and wind it onto the reel two or three turns. Step 8 Place the take-up reel into place behind the printer, above the roll paper. Step 9 Press the j key to take up any slack in the paper. During machine installation, press the j key after power on. Complete Close the printer cover.