Cisco CP-7940G-CH1 Administration Guide - Page 47
Installing the Cisco Unified IP Phone - power adapter
View all Cisco CP-7940G-CH1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Chapter 3 Setting Up the Cisco Unified IP Phone Installing the Cisco Unified IP Phone Caution In European Union countries, use only external headsets that are fully compliant with the EMC Directive [89/336/EC]. Installing the Cisco Unified IP Phone You must connect the Cisco Unified IP Phone to the network and to a power source before using it. See Figure 3-1 for a graphical representation of the connections. Note Before you install a phone, even if it is new, upgrade the phone to the current firmware image. Before using external devices, read the "Using External Devices with Your Cisco Unified IP Phone" section on page 3-4 for safety and performance information. Before You Begin Remove the hookswitch clip (see the "Handset" section on page 3-3) from the cradle area. To install a Cisco Unified IP Phone, perform the following steps: Table 3-1 Installing the Cisco Unified IP Phone 7960G and 7940G Task Procedure Reference 1. Connect the handset to the Handset port. - 2. Connect a headset to the Headset port. See the "Headset" section on page 3-3 for Optional. You can add a headset later if you do not connect one now. supported headsets. 3. Connect the power supply to the Cisco DC Adapter port. Optional. See the "Providing Power to the Cisco Unified IP Phone" section on page 2-3 for guidelines. 4. Connect a Category 3 or 5 straight-through Ethernet cable from the See the "Network and Access Ports" section switch to the 10/100 SW port. on page 3-3 for guidelines. 5. Connect a Category 3 or 5 straight-through Ethernet cable from See the "Network and Access Ports" section another network device, such as a desktop computer, to the 10/100 on page 3-3 for guidelines. PC port. Optional. You can connect another network device later if you do not connect one now. OL-15498-01 Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP) 3-5