Cisco CP-7940G-CH1 Administration Guide - Page 64
Cisco Unified Communications Manager Options, State, Description, Option, To Change
View all Cisco CP-7940G-CH1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Network Configuration Menu Chapter 4 Configuring Network Settings on the Cisco Unified IP Phone Table 4-2 Network Configuration Menu Options (continued) Option Description To Change Connection Monitor Duration Time, in seconds, after a failover that the link between the phone and a Cisco Unified Communications Manager server must remain stable (with no link-flapping) before the phone falls back from SRST to the Cisco Unified Communications Manager server From Cisco Unified Communications Manager, choose System > Enterprise Parameters. PC VLAN Allows the phone to interoperate with third-party switches that do not support a voice VLAN. The Admin VLAN ID option must be set before you can change this option. 1. Unlock network configuration options. 2. Make sure the Admin VLAN ID option is set. 3. Scroll to the PC VLAN option, press the Edit softkey, and then enter a new PC VLAN setting. 4. Press the Validate softkey and then press the Save softkey. Cisco Unified Communications Manager Options The CallManager Configuration menu contains the options Communications Manager 1, Communications Manager 2, Communications Manager 3, Communications Manager 4, and Communications Manager 5. These options show Cisco Unified Communications Manager servers that are available for processing calls from the phone, in prioritized order. To change these options, use Cisco Unified Communications Manager Administration, Cisco Unified CM Group Configuration. For an available Cisco Unified Communications Manager server, an option on the CallManager Configuration menu will show the Cisco Unified Communications Manager server IP address or name and one of the states shown in Table 4-3. Table 4-3 State Active Standby Blank Cisco Unified Communications Manager Server States Description Cisco Unified Communications Manager server from which the phone is currently receiving call-processing services Cisco Unified Communications Manager server to which the phone switches if the current server becomes unavailable No current connection to this Cisco Unified Communications Manager server An option may also display one of more of the designations or icons shown in Table 4-4: 4-10 Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP) OL-15498-01