Cisco SPA501G Administration Guide - Page 219

Cisco SPA IP Phone Field Reference Info Tab A Parameter Description SIP Bytes Recv Total number of bytes of SIP messages received (including retransmissions). External IP External IP address used for NAT mapping. Operational VLAN ID ID of the VLAN currently in use if applicable. NOTE Not applicable to Cisco WIP310. SW Port (Cisco SPA300 Series and Cisco SPA500 Series) Displays the type of Ethernet connection from the IP phone to the switch. PC Port (Cisco SPA303 and Cisco SPA500 Series) Indicates whether the link from the IP phone to a device plugged into the PC port on the phone is up or down. Ext Status The following parameters show for each extension on the phone. Parameter Registration State Last Registration At Next Registration In Message Waiting Mapped SIP Port Description Shows "Registered" if the phone is registered, "Not Registered" if the phone is not registered to the ITSP. Last date and time the line was registered. Number of seconds before the next registration renewal. Indicates whether the phone user has a new voice mail waiting: Yes or No. This is updated when voice mail notification is received. Port number of the SIP port mapped by NAT. Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 218