Cisco SPA501G Administration Guide - Page 300

Cisco SPA IP Phone Field Reference Ext Tab A Call Feature Settings Parameter Blind Attn-Xfer Enable MOH Server Message Waiting Auth Page Description Enables the IP phone to perform an attended transfer operation by ending the current call leg and performing a blind transfer of the other call leg. If this feature is disabled, the IP phone performs an attended transfer operation by referring the other call leg to the current call leg while maintaining both call legs. To use this feature, select yes. Otherwise, select no. Defaults to no. User ID or URL of the auto-answering streaming audio server. When only a user ID is specified, the current or outbound proxy is contacted. Music-onhold is disabled if the MOH Server is not specified. Defaults to imusic when used with a Cisco SPA9000 IP PBX. Indicates whether the Message Waiting Indicator on the phone is lit. This parameter is toggled by a message from the SIP proxy to indicate if a message is waiting. You can manually modify it to clear or set the flag in the Ext 1-6 tab. Setting this value to Yes can activate stutter tone and VMWI signal. This parameter is stored in longterm memory and survives after reboot or power cycle. Defaults to No. Specifies whether to authenticate the invite before auto answering a page. Defaults to No. Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 299