Cisco SPA501G Administration Guide - Page 220

Cisco SPA IP Phone Field Reference Info Tab A Line/Call Status The following parameters show for each line and call on the phone. Parameter Call State Tone Encoder Decoder Type Remote Hold Callback Peer Name Peer Phone Duration Packets Sent Packets Recv Bytes Sent Bytes Recv Mapped RTP Port Media Loopback Decode Latency Jitter Description Status of the call. Type of tone used by the call. Codec used for encoding. Codec used for decoding. Direction of the call. Indicates whether the far end has placed the call on hold. Indicates whether the call was triggered by a call back request. Name of the internal phone. Phone number of the internal phone. Duration of the call. Number of packets sent. Number of packets received. Number of bytes sent. Number of bytes received. The port mapped for Real Time Protocol traffic for the call. If the call is a loopback call, displays the loopback mode (source or mirror) and type (media or packet). If the call is not loopback, the field appears blank. Number of milliseconds for decoder latency. Number of milliseconds for receiver jitter. Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 219