Cisco SPA501G Administration Guide - Page 66

Customizing Standard Features Customizing Phone Softkeys STEP 4 Click Submit All Changes. 3 Programmable Softkeys The Cisco SPA300 Series and Cisco SPA500 Series IP Phones provide six programmable softkeys (fields PSK 1 through PSK 6). These keys can be defined by either a speed dial script or an XML service script. To configure programmable softkeys: STEP 1 Click Admin Login > advanced > Voice > Phone. STEP 2 (Cisco SPA525G or Cisco SPA525G2 only) Under Programmable Softkey Enable, choose yes to enable. To configure a speed dial script, enter the following in the PSK field: fnc=sd;ext=extensionname@$PROXY;vid=outboundextnum;nme=name where fnc is the function of the key (speed dial), ext (extensionname) is the extension being dialed, vid is the extension on the calling phone from which the outbound call is sent, and name is the name of the speed dial being configured. Vertical service activation codes (* codes) are supported in speed dial configurations. The name field displays on the softkey on the IP phone screen. Cisco recommends a maximum of 8 characters for a Cisco SPA30X or Cisco SPA50X phone and 10 characters for a Cisco SPA525G or Cisco SPA525G2 phone. If more characters are used, the label can be truncated on the IP phone screen. To configure an XML script, enter the following in the PSK field: fnc=xml;url=http://scriptURL.xml;nme=scriptname where fnc is the function of the key (an XML script), scriptURL.xml is the URL where the script is located, and scriptname is the name of the script. The scriptname field displays on the softkey on the IP phone screen. Cisco recommends a maximum of 8 characters for a Cisco SPA300 Series or Cisco SPA500 Series phone and 10 characters for a Cisco SPA525G or Cisco SPA525G2 phone. If more characters are used, the label can be truncated on the IP phone screen. Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 65