Cisco WS-C4003 Software Guide - Page 203
Configuring Dynamic Ports on VMPS Clients
View all Cisco WS-C4003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
Chapter 12 Configuring Dynamic Port VLAN Membership with VMPS Configuring VMPS and Dynamic Port VLAN Membership To configure VMPS, perform this task in privileged mode: Step 1 Step 2 Step 3 Task Command Specify the download method. set vmps downloadmethod rcp | tftp [username] Configure the IP address of the TFTP or rcp server set vmps downloadserver ip_addr [filename] on which the ASCII text VMPS database configuration file resides. Verify the VMPS configuration. show vmps Configuring Dynamic Ports on VMPS Clients To configure dynamic ports on VMPS client switches, perform this task in privileged mode: Step 1 Step 2 Step 3 Step 4 Task Specify the IP address of the VMPS server (the switch with VMPS enabled). Verify the VMPS server specification. Configure dynamic port VLAN membership assignment to a port. Verify the dynamic port assignments. Command set vmps server ip_addr [primary] show vmps server set port membership mod_num/port_num dynamic show port [mod_num[/port_num]] This example shows how to specify the VMPS server, verify the VMPS server specification, assign dynamic ports, and verify the configuration: Console> (enable) show vmps server VMPS domain server VMPS Status 192.0.0.6 192.0.0.1 primary 192.0.0.9 Console> (enable) set port membership 3/1-3 dynamic Ports 3/1-3 vlan assignment set to dynamic. Spantree port fast start option enabled for ports 3/1-3. Console> (enable) set port membership 1/2 dynamic Trunking port 1/2 vlan assignment cannot be set to dynamic. Console> (enable) set port membership 2/1 dynamic ATM LANE port 2/1 vlan assignment can not be set to dynamic. Console> show port Port Name Status Vlan Level Duplex Speed 1/1 connect dyn-3 normal full 100 1/2 connect trunk normal half 100 2/1 connect trunk normal full 155 3/1 connect dyn-5 normal half 10 3/2 connect dyn-5 normal half 10 3/3 connect dyn-5 normal half 10 Console> (enable) Type 100 BASE-TX 100 BASE-TX OC3 MMF ATM 10 BASE-T 10 BASE-T 10 BASE-T Note The show port command displays dyn- under the Vlan column of the display when it has not yet been assigned a VLAN for a port. 78-12647-02 Software Configuration Guide-Catalyst 4000 Family, Catalyst 2948G, Catalyst 2980G, Releases 6.3 and 6.4 12-5