Cisco WS-C4003 Software Guide - Page 240
Enabling GMRP on Individual Switch Ports, Disabling GMRP on Individual Switch Ports
View all Cisco WS-C4003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 240 highlights
Configuring GMRP Chapter 15 Configuring Multicast Services Port GMRP Status Registration ForwardAll 1/1-2,3/1,6/1-48 Enabled Normal Disabled Console> (enable) Enabling GMRP on Individual Switch Ports Note You can change the per-port GMRP configuration regardless of whether GMRP is enabled globally. However, GMRP will not function on any ports until you enable it globally. For information on configuring GMRP globally on the switch, see the "Enabling GMRP Globally" section on page 15-9. To enable GMRP on individual switch ports, perform this task in privileged mode: Step 1 Step 2 Task Enable GMRP on an individual switch port. Verify the configuration. Command set port gmrp enable mod_num/port_num show gmrp configuration This example shows how to enable GMRP on port 6/12 and verify the configuration: Console> (enable) set port gmrp enable 6/12 GMRP enabled on port 6/12. Console> (enable) show gmrp configuration Global GMRP Configuration: GMRP Feature is currently enabled on this switch. GMRP Timers (milliseconds): Join = 200 Leave = 600 LeaveAll = 10000 Port based GMRP Configuration: Port GMRP Status Registration ForwardAll 1/1-2,3/1,6/1-9,6/12,6/15-48 Enabled Normal Disabled 6/10-11,6/13-14 Disabled Normal Disabled Console> (enable) Disabling GMRP on Individual Switch Ports Note You can change the per-port GMRP configuration regardless of whether GMRP is enabled globally. However, GMRP will not function on any ports until you enable it globally. For information on configuring GMRP globally on the switch, see the "Enabling GMRP Globally" section on page 15-9. To disable GMRP on individual switch ports, perform this task in privileged mode: Step 1 Step 2 Task Disable GMRP on individual switch ports. Verify the configuration. Command set port gmrp disable mod_num/port_num show gmrp configuration 15-10 Software Configuration Guide-Catalyst 4000 Family, Catalyst 2948G, Catalyst 2980G, Releases 6.3 and 6.4 78-12647-02