Cisco WS-C4003 Software Guide - Page 242
Configuring GMRP Registration, Setting Normal Registration Mode
View all Cisco WS-C4003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 242 highlights
Configuring GMRP Chapter 15 Configuring Multicast Services Configuring GMRP Registration These sections describe how to configure GMRP registration modes on switch ports: • Setting Normal Registration Mode, page 15-12 • Setting Fixed Registration Mode, page 15-12 • Setting Forbidden Registration Mode, page 15-13 Setting Normal Registration Mode Configuring a port in normal registration mode allows dynamic GMRP multicast registration and deregistration on the port. Normal mode is the default on all switch ports. To configure GMRP normal registration on a port, perform this task in privileged mode: Task Step 1 Configure normal registration on a port. Step 2 Verify the configuration. Command set gmrp registration normal mod_num/port_num show gmrp configuration This example shows how to configure normal registration on port 2/10: Console> (enable) set gmrp registration normal 2/10 GMRP Registration is set normal on port 2/10. Console> (enable) Setting Fixed Registration Mode When you configure a port in fixed registration mode, all the multicast groups currently registered on all ports are registered on the port, but the port ignores any subsequent registrations or deregistrations on other ports. A port in fixed registration mode continues to register multicast groups that are specific to the port. You must return the port to normal registration mode to deregister multicast groups on the port. To configure GMRP fixed registration on a port, perform this task in privileged mode: Step 1 Step 2 Task Configure fixed registration on a port. Verify the configuration. Command set gmrp registration fixed mod_num/port_num show gmrp configuration This example shows how to configure fixed registration on port 2/10 and verify the configuration: Console> (enable) set gmrp registration fixed 2/10 GMRP Registration is set fixed on port 2/10. Console> (enable) show gmrp configuration Global GMRP Configuration: GMRP Feature is currently enabled on this switch. GMRP Timers (milliseconds): Join = 200 Leave = 600 LeaveAll = 10000 Port based GMRP Configuration: 15-12 Software Configuration Guide-Catalyst 4000 Family, Catalyst 2948G, Catalyst 2980G, Releases 6.3 and 6.4 78-12647-02