Clifford IntelliGuard 950 Owners Guide - Page 13
disarming
View all Clifford IntelliGuard 950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
not chirp. The early chirps provide you with a 25-second warning prior to arming. note: If any protected entry point (a door or a switch-protected boot or bonnet) is open, the system will not passively arm. Additionally, each time a protected entry is triggered during the arming countdown, the 30-second countdown starts from the beginning. When armed, your vehicle is protected as follows: z The LED will flash as a visible theft deterrent. z The Ultrasecure Immobilisation circuits prevent the vehicle from being started. z Installed sensors if tripped will trigger the system. The trig- gered sequence is 30 seconds of constant siren sounding and flashing indicator lights. z If a protected entry (door, boot, or bonnet) is opened, the system will immediately trigger the siren and flash the indicator lights. z The tilt/motion sensor will protect the vehicle from being raised in an attempt to either remove the wheels/tires or tow the vehicle. disarming To disarm the system, press . You will hear a chirp and the indica- tor lights will flash once. If the vehicles central locking is connected to the system, the doors will unlock. If the siren chirps three times when dis- arming, refer to the Diagnostics section of this guide. This is called Tamper Alert. If the siren is sounding when the system is disarmed you will hear two chirps but the system is not disarmed. (Refer to the Remote Siren Silencing section of this guide.) However, if the alarm completes the full trigger cycle when disarmed you will hear three chirps. 10