Clifford IntelliGuard 950 Owners Guide - Page 34
auto-immobilisation sequence, one-time valet feature
View all Clifford IntelliGuard 950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
auto-immobilisation sequence 1. Turn ignition off or disarm alarm 2. After 30 seconds the systems Immobilisation circuits activate and engage the starter and ignition interrupt 3. LED flashes at ½ normal speed Disarming auto-immobilisation To disarm auto-immobilisation when active, follow any of the sequences listed below. z Turn ignition on and press the arm/disarm button. z Arm the alarm and then disarm the alarm. z Turn the ignition on and enter the system valet/PIN code. one-time valet feature This feature allows the system to be put in valet mode only until the next time the ignition is turned on. (This feature is a Thatcham and EC requirement and, therefore is not programmable.) © 2004 directed electronics, inc. 31
31
© 2004 directed electronics, inc.
auto-immobilisation sequence
1.
Turn ignition off or disarm alarm
2.
After 30 seconds the systems Immobilisation circuits activate
and engage the starter and ignition interrupt
3.
LED flashes at ½ normal speed
Disarming auto-immobilisation
To disarm auto-immobilisation when active, follow any of the
sequences listed below.
Turn ignition on and press the arm/disarm button.
Arm the alarm and then disarm the alarm.
Turn the ignition on and enter the system valet/PIN code.
one-time valet feature
This feature allows the system to be put in valet mode only until the
next time the ignition is turned on. (This feature is a Thatcham and EC
requirement and, therefore is not programmable.)