Clifford IntelliGuard 950 Owners Guide - Page 32

ters that have been lost, stolen, or incorrectly programmed into the system. z After entering this feature press any button on the transmitter; the siren will chirp to indicate that all transmitters have been erased from memory. pin programming A PIN code can have one to four digits; each digit can be from 0-9. note: A PIN code cannot begin with a zero. Programming Procedure 1. Enter the feature location in the installer programming grid. 2. Immediately press and release switch. of the PlainView 2 Valet 3. Select each digit by pressing 1-9 times, and then press to enter the number into the system. To enter a zero, press only. To program a PIN code of 1032: a. Press and release hear one chirp. once and once. You will b. Press and release once. You will not hear a chirp after programming a zero. c. Press and release three times, and then press once. You will hear three chirps. © 2004 directed electronics, inc. 29