Clifford IntelliGuard 950 Owners Guide - Page 18
one-time auto-arming bypass, low battery warning, automatic noise abatement
View all Clifford IntelliGuard 950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
one-time auto-arming bypass This will bypass the auto arm feature once only. 1. With the key, turn the ignition on, then off within two seconds. 2. The siren will chirp once to confirm auto arming bypass. 3. The system will not auto arm. note: The system will revert to normal auto arming when the system sees the ignition on for at least three seconds. During auto arming bypass the system will not roll up the windows if SmartWindows is connected, and the accessory output will not autoactivate when using the remote to arm the system. low battery warning When the transmitter battery is low, the siren will generate a lowpitched tone when the alarm is disarmed. automatic noise abatement Alarm sounding is limited to ten 30-second siren duration cycles to meet European criteria and local noise pollution laws. © 2004 directed electronics, inc. 15