Clifford IntelliGuard 950 Owners Guide - Page 15

transmitter sensor disable To temporarily disable a sensor input, arm the system, press twice and then . The lights will flash four times and all warn away trigger zones one, two, three, and eight are bypassed. Press the buttons again; the lights flash four times and both warn away and full trigger zones one, two, three, and eight are bypassed until the system is disarmed. This can be performed anytime the system is armed. 1. Arm the system. 2. Press twice and then . 3. The lights will flash four times; all warn away zones are now bypassed. 4. Transmit the sensor bypass channel again. (Press twice and then .) 5. The lights will flash four more times; the sensor warn away and full trigger zones are now bypassed. 6. The sensor zones will reset when disarmed. intellistart and smartwindows sensor bypass When the system sees a command to start the vehicle via the Intellistart, it bypasses sensor zones and will continue to bypass these zones until the remote start shuts down. When the system sees a SmartWindows command for up or down operation, the unit will automatically bypass sensor zones one, two, three, and eight until the windows complete their operation. 12