Clifford IntelliGuard 950 Owners Guide - Page 30

blackjax* on/off z On: The system will enter BlackJax mode when triggered. z Off: The system cannot enter BlackJax mode. user selectable features descriptions - column three The features in this column pertain to programming individual transmitter channels in custom configurations. Following is an explanation of the features. The 4-button remote must be programmed using this column as it cannot be autolearned. arm/disarm only The remote control channel programmed into this feature will arm/disarm the system only. Once you have entered the feature press the button on the remote that will be used to arm/disarm the system. You will hear 1 siren chirp. Then press the button again. You will hear 2 siren chirps. The remote button will now arm/disarm the system. note: When programming a new remote control to custom configuration a channel must first be programmed to this feature before programming the remaining channels. To program the following channels use the instructions above for programming the arm/disarm button except you only need to press the button once. accessory a output The transmitter channel programmed into this feature will activate the accessory output. * This feature is not evaluated by Thatcham © 2004 directed electronics, inc. 27