Compaq 1700 Compaq Armada 1700 Series Reference Guide - Page 128
In the Current Drive select MultiBay., Click the System Features icon
UPC - 743172505040
View all Compaq 1700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
To establish DriveLock protection: 1. Run Computer Setup by turning on or restarting the computer (Start Æ Shut Down ÆRestart). When the blinking cursor appears in the upper-right corner of the screen, press F10. 2. Click the System Features icon Æ Security Management box Æ DriveLock tab. 3. In the Current Drive section, select MultiBay. 4. In the Drive Protection section, click Set to establish DriveLock protection for the selected hard drive. 5. Read the warning message. If you wish to continue, click OK. 6. In the Set User Password section, enter your new user password. (You may use up to 32 alphanumeric characters, and you may use the same password you are using for the power-on password.) NOTE: Type carefully because the password does not display as you type it. 7. Enter the user password again to verify it. 8. Click OK. 9. In the Set Master Password section, enter your new master password. (You may use up to 32 alphanumeric characters, and you may use the same password you are using for the power-on password.) NOTE: Type carefully because the password does not display as you type it 10. Enter the master password again to verify it. 11. Click OK. 12. Read the warning message. If you wish to establish DriveLock, type "DriveLock" at the prompt. 13. Click OK. The changes will take place when Computer Setup has been exited normally. You will be prompted to enter your user password the next time you boot your computer using that hard drive. Security Features 13-15