Compaq 6730s HP Compaq 6730s and 6735s Notebook PC - Maintenance and Service G - Page 101
Use a flat-bladed screwdriver to turn the processor locking screw, one-half turn counterclockwise
UPC - 884420582700
View all Compaq 6730s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
a. Hard drive (see Hard drive on page 51) b. Optical drive (see Optical drive on page 59) c. Switch cover and keyboard (see Switch cover and keyboard on page 61) d. Speakers (see Speakers on page 66) e. Display assembly (see Display assembly on page 67) f. Top cover (see Top cover on page 74) g. System board (see System board on page 83) Remove the processor: NOTE: Steps 1 through 3 apply only to HP Compaq 6730s models. See steps 4 and 5 for instructions on removing the processor on HP Compaq 6735s models. 1. Turn the system board upside down, with the USB connectors toward you. 2. Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn counterclockwise until you hear a click. 3. Lift the processor (2) straight up and remove it. NOTE: When you install the processor, the gold triangle (3) on the processor must be aligned with the triangle (4) embossed on the processor socket. NOTE: Steps 4 and 5 apply only to HP Compaq 6735s models. See steps 1 through 3 for instructions on removing the processor on HP Compaq 6530s and 6531s models. 4. Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn counterclockwise until you hear a click. Component replacement procedures 93