Compaq 6730s HP Compaq 6730s and 6735s Notebook PC - Maintenance and Service G - Page 77
Flex the inside edges of the left and right sides
UPC - 884420582700
View all Compaq 6730s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
2. Lift the display assembly (3) straight up and remove it. 3. If it is necessary to replace the display bezel, display inverter, or display hinges, remove the eight rubber screw covers (1) and the eight Torx T8M2.5×6.0 screws (2) that secure the display bezel to the display assembly. The rubber screw covers are available in the Rubber Kit, spare part numbers 491257-001 (for use only with HP Compaq 6730s Notebook PC models) and 491620-001 (for use only with HP Compaq 6735s Notebook PC models). 4. Flex the inside edges of the left and right sides (1) and the top and bottom sides (2) of the display bezel until the bezel disengages from the display enclosure. Component replacement procedures 69
2.
Lift the display assembly
(3)
straight up and remove it.
3.
If it is necessary to replace the display bezel, display inverter, or display hinges, remove the eight
rubber screw covers
(1)
and the eight Torx T8M2.5×6.0 screws
(2)
that secure the display bezel
to the display assembly. The rubber screw covers are available in the Rubber Kit, spare part
numbers 491257-001 (for use only with HP Compaq 6730s Notebook PC models) and 491620-001
(for use only with HP Compaq 6735s Notebook PC models).
4.
Flex the inside edges of the left and right sides
(1)
and the top and bottom sides
(2)
of the display
bezel until the bezel disengages from the display enclosure.
Component replacement procedures
69