Compaq 6730s HP Compaq 6730s and 6735s Notebook PC - Maintenance and Service G - Page 78
To replace the webcam module in the display enclosure, align the holes on the webcam
UPC - 884420582700
View all Compaq 6730s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
5. Remove the display bezel (3). The display bezel is available using spare part numbers 491257-001 (for use only with HP Compaq 6730s Notebook PC models without a webcam), 491258-001 (for use only with HP Compaq 6730s Notebook PC models with a webcam), 494109-001 (for use only with HP Compaq 6735s Notebook PC models with a webcam), and 494108-001 (for use only with HP Compaq 6735s Notebook PC models without a webcam). 6. If it is necessary to replace the webcam module from the display enclosure, gently pull the webcam module away from the double-sided tape on the display enclosure (1) and disconnect the webcam cable from the module (2). The webcam module can be ordered by using spare part numbers 491251-001 (for use only with HP Compaq 6730s Notebook PC models) and 494110-001 (for use only with HP Compaq 6735s Notebook PC models). NOTE: To replace the webcam module in the display enclosure, align the holes on the webcam module with the pins on the display enclosure and press onto the double-sided tape. 7. If it is necessary to replace the display inverter, remove the inverter (1) from the display enclosure as far as the display panel cable and the backlight cable will allow. 70 Chapter 4 Removal and replacement procedures