Compaq 6730s HP Compaq 6730s and 6735s Notebook PC - Maintenance and Service G - Page 85
USB connector module, Remove the USB connector module
UPC - 884420582700
View all Compaq 6730s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
USB connector module 1. Disconnect the USB cable from the system board (1). 2. Lift up the USB connector and remove the cable from the front edge of the base enclosure (2). 3. Remove the long Phillips PM2.5×9.0 screw (3) and the short Torx T8M2.5×4.0 screw (4) from the system board. 4. Remove the USB connector module (5). Reverse this procedure to install the USB connector module. Component replacement procedures 77
USB connector module
1.
Disconnect the USB cable from the system board
(1)
.
2.
Lift up the USB connector and remove the cable from the front edge of the base enclosure
(2)
.
3.
Remove the long Phillips PM2.5×9.0 screw
(3)
and the short Torx T8M2.5×4.0 screw
(4)
from the
system board.
4.
Remove the USB connector module
(5)
.
Reverse this procedure to install the USB connector module.
Component replacement procedures
77