Compaq ProLiant 6500 Compaq Parallel Database Cluster Model PDC/O1000 for Orac - Page 77
Disk Drive Planning, Nonshared Disk Drives
View all Compaq ProLiant 6500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
4-18 Compaq Parallel Database Cluster Model PDC/O1000 for Oracle8i and Windows 2000 Administrator Guide Use Disk Management to define one extended partition per RAID logical drive. Also using Disk Management, divide the extended partitions into logical partitions, each having its own drive letter. (Windows 2000 Advanced Server logical partitions are called "logical drives" in the Oracle documentation.) IMPORTANT: To performing partitioning, all required drivers must already be installed for each server. For information about drivers, refer to the Compaq Parallel Database Cluster Model PDC/O1000 Certification Matrix for Windows 2000. Disk Drive Planning Nonshared Disk Drives Nonshared disk drives, or local storage, operate the same way in a cluster as they do in a single-server environment. These drives can be in the server drive bays or in an external storage enclosure. As long as they are not accessible by multiple servers, they are considered nonshared. Treat nonshared drives in a clustered environment as you would in a non-clustered environment. In most cases, some form of RAID is used to protect the drives and aid in restoration of a failed drive. Since the Oracle Parallel Server application files are stored on these drives, it is recommended that you use hardware RAID. Hardware RAID is the recommended solution for RAID configuration because of its superior performance. For the PDC/O1000, hardware RAID for nonshared drives can be implemented with a Compaq SMART-2 controller or by using dedicated RA4000/RA4100 Arrays for nonshared storage. Shared Disk Drives Shared disk drives are contained in the RA4000/RA4100 Arrays and are accessible to each node in the PDC/O1000. If a logical drive is configured with a RAID level that does not support fault tolerance (for example, RAID 0), then the failure of the shared disk drives in that logical drive will disrupt service to all Oracle databases that are dependent on that disk drive. See "Selecting the Appropriate RAID Levels" earlier in this chapter. As with other types of failures, Compaq Insight Manager monitors the status of shared disk drives and will mark a failed drive as "Failed."