Compaq ProLiant 6500 Compaq Parallel Database Cluster Model PDC/O1000 for Orac - Page 84
Cabling the Fibre Host Adapters to the Storage Hub, FC-AL Switch, or Fibre Channel SAN Switch
View all Compaq ProLiant 6500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Installation and Configuration 5-5 To install GBIC-SW modules: 1. Verify that a GBIC-SW module has been installed in each Fibre Host Adapter in a server. 2. Insert a GBIC-SW module into the port for the Fibre Host Adapter on its Storage Hub, FC-AL Switch, or Fibre Channel SAN Switch. Cabling the Fibre Host Adapters to the Storage Hub, FC-AL Switch, or Fibre Channel SAN Switch Each non-redundant Fibre Channel Fabric requires on Fibre Channel SAN Switch. Each non-redundant FC-AL requires one Storage Hub or one FC-AL Switch. To cable the Fibre Host Adapters to the Storage Hub, FC-AL Switch or Fibre Channel SAN Switch: 1. Identify the Fibre Host Adapters, Storage Hub, FC-AL Switch or Fibre Channel SAN Switch, and Fibre Channel cables for the non-redundant Fibre Channel Fabric or non-redundant FC-AL. 2. Using Fibre Channel cables, connect the Fibre Host Adapter in each server to the Storage Hub, FC-AL Switch, or Fibre Channel SAN Switch. IMPORTANT: When connecting a Fibre Host Adapter to a Storage Hub, FC-AL Switch or Fibre Channel SAN Switch, do not mount the Fibre Channel cables on cable management arms. Support the Fibre Channel cable so that a bend radius at the cable connector is not less than 3 inches.