Compaq ProLiant 6500 Compaq Parallel Database Cluster Model PDC/O1000 for Orac - Page 95

Cabling the Client LAN, Redundant Client LAN

Get Compaq ProLiant 6500 PDF manuals and user guides View all Compaq ProLiant 6500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 95 highlights

5-16 Compaq Parallel Database Cluster Model PDC/O1000 for Oracle8i and Windows 2000 Administrator Guide Cabling the Client LAN You can use any TCP/IP network to connect to a client LAN. The following procedure contains instructions for cabling an Ethernet client LAN. To cable an Ethernet client LAN: 1. Insert one end of an Ethernet cable into an Ethernet adapter port designated for the client LAN in a cluster node. If you are using a recommended dual-port Ethernet adapter for the cluster interconnect, connect the client LAN to the empty port. If you are using a recommended single-port adapter for the cluster interconnect, connect the client LAN to the port on the embedded adapter or to another single-port Ethernet adapter. 2. Connect the node to the client LAN by inserting the other end of the client LAN Ethernet cable to a port in the Ethernet hub or switch. 3. Repeat steps 1 and 2 for all other cluster nodes. Redundant Client LAN If you elect to install an Ethernet client LAN, you must provide two single-port Ethernet adapters or one dual-port Ethernet adapter for the client LAN in each cluster node. You must also have two Ethernet hubs or switches, and one Ethernet crossover cable must be installed between the Ethernet hubs or switches. Installing redundant crossover cables directly between the nodes is not supported. For information on configuring Ethernet connections in a redundant client LAN, including enabling failover from one Ethernet path to another, see Supported Ethernet Interconnects for Compaq Parallel Database Clusters Using Oracle Parallel Server at www.compaq.com/support/techpubs/whitepapers

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
5-16
Compaq Parallel Database Cluster Model PDC/O1000 for Oracle8i and Windows 2000 Administrator Guide
Cabling the Client LAN
You can use any TCP/IP network to connect to a client LAN. The following
procedure contains instructions for cabling an Ethernet client LAN.
To cable an Ethernet client LAN:
1.
Insert one end of an Ethernet cable into an Ethernet adapter port
designated for the client LAN in a cluster node.
If you are using a recommended dual-port Ethernet adapter for the
cluster interconnect, connect the client LAN to the empty port.
If you are using a recommended single-port adapter for the cluster
interconnect, connect the client LAN to the port on the embedded
adapter or to another single-port Ethernet adapter.
2.
Connect the node to the client LAN by inserting the other end of the
client LAN Ethernet cable to a port in the Ethernet hub or switch.
3.
Repeat steps 1 and 2 for all other cluster nodes.
Redundant Client LAN
If you elect to install an Ethernet client LAN, you must provide two
single-port Ethernet adapters or one dual-port Ethernet adapter for the client
LAN in each cluster node. You must also have two Ethernet hubs or switches,
and one Ethernet crossover cable must be installed between the Ethernet hubs
or switches. Installing redundant crossover cables directly between the nodes
is not supported.
For information on configuring Ethernet connections in a redundant client
LAN, including enabling failover from one Ethernet path to another, see
Supported Ethernet Interconnects for Compaq Parallel Database Clusters
Using Oracle Parallel Server
at
www.compaq.com/support/techpubs/whitepapers