Compaq ProLiant 6500 Compaq Parallel Database Cluster Model PDC/O1000 for Orac - Page 92
To connect two or more nodes in a non-redundant Ethernet cluster
View all Compaq ProLiant 6500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Installation and Configuration 5-13 Figure 5-4 shows the non-redundant Ethernet cluster interconnect components used in a two-node PDC/O1000 cluster. These components include a dual-port Ethernet adapter in each node. The top port on each adapter connects by Ethernet crossover cable to the top port on the adapter in the other node. The bottom port on each adapter connects by Ethernet cable to the client LAN switch or hub. Dual-port Ethernet Adapter Ethernet Crossover Cable for Ethernet Cluster Interconnect Ethernet Cables for Client LAN Dual-port Ethernet Adapter Node 1 Node 2 Client LAN Hub or Switch Figure 5-4. Non-redundant Ethernet cluster interconnect using a crossover cable To connect two or more nodes in a non-redundant Ethernet cluster interconnect using an Ethernet switch or hub: 1. Install a standard Ethernet cable between an Ethernet adapter in one node and one Ethernet hub or switch. 2. Repeat step 1 for every other node in the cluster.