Compaq ProLiant 6500 Compaq Parallel Database Cluster Model PDC/O1000 for Orac - Page 85
Installing the Cluster Interconnect Adapters, Storage Hub, FC-AL Switch, or Fibre Channel SAN Switch.
View all Compaq ProLiant 6500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
5-6 Compaq Parallel Database Cluster Model PDC/O1000 for Oracle8i and Windows 2000 Administrator Guide Figure 5-1 shows the Fibre Host Adapters in four nodes connected to one Storage Hub, FC-AL Switch, or Fibre Channel SAN Switch. Fibre Host Adapters Client LAN Fibre Host Adapters ProLiant Servers Switch (Cluster Interconnect) ProLiant Servers Storage Hub/Switch RA4000/4100 Array Figure 5-1. Connecting Fibre Host Adapters to a Storage Hub, FC-AL Switch, or Fibre Channel SAN Switch For more information about the Storage Hubs, see the Compaq StorageWorks Storage Hub 7 Installation Guide and the Compaq StorageWorks Storage Hub 12 Installation Guide. For more information about the FC-AL Switch, see the Compaq StorageWorks Fibre Channel Arbitrated Loop Switch (FC-AL Switch) User Guide. For more information about the Fibre Channel SAN Switch, see the Compaq StorageWorks Fibre Channel SAN Switch 8 Installation and Hardware Guide, the Compaq StorageWorks Fibre Channel SAN Switch 16 Installation and Hardware Guide, and the Compaq StorageWorks Fibre Channel SAN Switch Management Guide provided with the Fibre Channel SAN Switch. Installing the Cluster Interconnect Adapters A PDC/O1000 running Oracle8i software uses an Ethernet cluster interconnect. Both redundant and non-redundant cluster interconnects are supported. However, a redundant cluster interconnect is recommended because if provides fault tolerance along the entire cluster interconnect path.