D-Link DCS-3220G Product Manual - Page 126
Advanced>Image Setting, Advanced>Image - video issues
UPC - 790069269523
View all D-Link DCS-3220G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Frequently Asked Questions (continued) Q: I connected the Internet Camera directly to a computer with a crossover cable Ethernet cable and received the following Windows error upon running IP Installer: A1: This Windows error will occur if the Internet Camera is connected to a computer that is not properly configured with a valid IP address. Turn off DHCP from the Network Settings in Windows and configure the computer with a valid IP address or connect the camera to a router with DHCP enabled. A2:This error can also occur if the IP Installer icon is clicked on more than once from the setup wizard. Q: The focus on the Internet Camera is bad, how can I correct it? A1: Adjust the Internet Camera focus manually as described in Adjusting the Internet Camera Focus in the Appendix section of this manual (page 133). Q: Noisy images occur. How can I solve the problem? A1: The video images might be noisy if the Internet Camera is used in a very low light environment. To solve this issue you need more lighting. Q: The images appear to be of poor quality, how can I improve the image quality? A1: Make sure that your computer's display properties are set above 256 colors. Using 16 or 256 colors on your computer will produce dithering artifacts in the image, making the image appear to be of poor quality. A2: The configuration on the Internet Camera image display is incorrect. Through the Advanced>Image Setting section of the Web management you need to adjust the image related parameters such as brightness, contrast, hue and power line frequency for fluorescent light . Please refer to the Advanced>Image Setting section on Page 49 for detailed information. 126