D-Link DCS-3220G Product Manual - Page 57

Using the DCS-3220G with an Internet browser (continued) Configuration > Tools > Applications (Continued) Reset output - Check and save this option to reset the external device at the digital output back to the original state. Trigger action - There are four options for two actions regarding either trigger condition. They can have multiple selections. While choosing the trigger output alarm, the digital output will short both pins to connect the circuit of the attached external device; otherwise both pins will be open. While choosing to upload snapshots, the method can be either email or FTP. The snapshot names will be "videopre.jpg", videotrg.jpg", and "videopos.jpg" respectively for the snapshots before event, right upon event, and after event. The date and time suffix may be added according to the option. Confirm the external mail or FTP server settings in network configuration. Sequential operation Snapshot every second(s) - The camera will send snapshots at the specified interval to the external server according to the chosen method. Remember this operation is dependent to the weekly schedule. Send snapshots by email - Any upload action specified in the options above will use the method chosen here. The captured snapshot named "video.jpg" will be attached in the email with subject "Periodic snapshots." Send snapshots by FTP - The captured snapshots will upload to the external FTP server with the file name depending on the next option. 57