D-Link DES-3852 Product Manual - Page 115
config gvrp, DES-3800:admin#config gvrp 1-4 state enable
UPC - 790069289460
View all D-Link DES-3852 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:admin#delete vlan vlanid 2-3 Command: delete vlan vlanid 2-3 Success. DES-3800:admin# config gvrp Purpose Syntax Description Parameters Restrictions Used to configure GVRP on the Switch. config gvrp [ | all ] {state [enable | disable] | ingress_checking [enable | disable] | acceptable_frame [tagged_only | admit_all] | pvid } This command is used to configure the Group VLAN Registration Protocol on the Switch. You can configure ingress checking, the sending and receiving of GVRP information, and the Port VLAN ID (PVID). − A port or range of ports for which you want to enable GVRP for a specific port. all − Specifies all of the ports on the Switch. state [enable | disable] − Enables or disables GVRP for the ports specified in the port list. ingress_checking [enable | disable] − Enables or disables ingress checking for the specified port list. acceptable_frame [tagged_only | admit_all] - This parameter states the frame type that will be accepted by the Switch for this function. tagged_only implies that only VLAN tagged frames will be accepted, while admit_all implies tagged and untagged frames will be accepted by the Switch. pvid - Specifies the default VLAN associated with the port. Only Administrator or Operator-level users can issue this command. Example usage: To set the ingress checking status, the sending and receiving GVRP information : DES-3800:admin#config gvrp 1-4 state enable ingress_checking enable acceptable_frame tagged_only pvid 2 Command: config gvrp 1-4 state enable ingress_checking enable acceptable_frame tagged_only pvid 2 Success. DES-3800:admin# NOTE: The Switch supports up to 4k Dynamic Entries. 111