D-Link DES-3852 Product Manual - Page 73
Network Monitoring Commands, show packet ports
UPC - 790069289460
View all D-Link DES-3852 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual 10 NETWORK MONITORING COMMANDS The network monitoring commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command show packet ports show error ports show utilization clear counters clear log show log enable syslog disable syslog Parameters [cpu | ports {}] {ports } index show syslog create syslog host config syslog host delete syslog host show syslog host config system_severity show system_severity ipaddress {severity [informational | warning | all] | facility [local0 | local1 | local2 | local3 | local4 | local5 | local6 | local7] | udp_port | state [enable | disable] [all | ] {severity [informational | warning | all] | facility [local0 | local1 | local2 | local3 | local4 | local5 | local6 | local7] | udp_port | ipaddress | state [enable | disable]} [ | all] {} [trap | log | all] [critical | warning | information] Each command is listed, in detail, in the following sections. show packet ports Purpose Syntax Description Parameters Restrictions Used to display statistics about the packets sent and received by the Switch. show packet ports This command is used to display statistics about packets sent and received by ports specified in the . − Specifies a port or range of ports to be displayed. None. 69