D-Link DES-3852 Product Manual - Page 196
config igmp, config igmp [ipif <ipif_name 12> | all] {version <value 1-3>
UPC - 790069289460
View all D-Link DES-3852 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config igmp Purpose Syntax Description Parameters Restrictions Used to configure IGMP on the Switch. config igmp [ipif | all] {version | query_interval | max_response_time | robustness_variable | last_member_query_interval | state [enable | disable]} This command allows users to configure IGMP on the Switch. − The name of the IP interface for which you want to configure IGMP. all − Specifies all the IP interfaces on the Switch. version − Select the IGMP version number. query_interval − The time in seconds between general query transmissions, in seconds. max_response_time − Enter the maximum time in seconds that the Switch will wait for reports from members. robustness_variable − This value states the permitted packet loss that guarantees IGMP. last_member_query_interval − The Max Response Time inserted into Group-Specific Queries and Group-and-Source specific queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query and Group-and-Source specific query messages. The default is 1 second state [enable | disable] − Enables or disables IGMP for the specified IP interface. Only Administrator or Operator-level users can issue this command. Example Usage: To configure the IGMPv2 for all IP interfaces. DES-3800:admin#config igmp all version 2 Command: config igmp all version 2 Success. DES-3800:admin# 192