D-Link DES-3852 Product Manual - Page 66
CTRL+C ESC q Quit SPACE n Next ENTER Next Entry a All - d link manual
UPC - 790069289460
View all D-Link DES-3852 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Example usage: To view the current configuration settings: DES-3800:admin#show config current_config Command: show config current_config # DES-3828 Configuration # # Firmware: Build 4.50-B10 #Copyright(C) 2000-2004 D-Link Corporation. All rights reserved. # DOUBLE_VLAN Diable double_vlan # BASIC config serial_port baud_rate 9600 auto_logout 10_minutes enable telnet 23 enable web 80 # BNR config command_prompt default CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All Example usage: To view saved configuration file information saved on the Switch: DES-3800:admin#show config information Command: show config information ID Version Size(B) Update Time From User ------- ----------- *1 4.05.B08 12961 2006/08/30 09:36:10 Local Saved 2 (empty) Note: * indicates the next boot up configuration (T) means configuration update through TELNET (S) means configuration update through SNMP (W) means configuration update through WEB DES-3800:admin# config configuration Purpose Syntax Description Parameters Used to configure the configuration section as a boot up section, or to delete the firmware section config configuration [boot_up | active | delete] This command is used to configure the configuration section. The user may choose to remove the configuration section, use it as a boot up or active section. - Specifies the working section. The Switch can hold two firmware versions for the user to select from, which are specified by configuration ID. boot_up - Entering this parameter will specify the configuration ID as a 62