D-Link DES-3852 Product Manual - Page 32
show ports, DES-3800:admin
UPC - 790069289460
View all D-Link DES-3852 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Example usage: To configure the speed of port 3 to be 10 Mbps, full duplex, with learning and state enabled: DES-3800:admin#config ports 1-3 speed 10_full learning enable state enable Command: config ports 1-3 speed 10_full learning enable state enable Success. DES-3800:admin# NOTE:Combo ports prefer to use Fiber cabling. The following are the modes that the user can use to configure the Giga port. - Auto, 1000Full - Auto, 100Full/Half, 10Full/Half show ports Purpose Syntax Description Parameters Restrictions Used to display the current configuration of a range of ports. show ports {} {[description} | err_disabled]} This command is used to display the current configuration of a range of ports. − Specifies a port or range of ports to be displayed. description - Adding this parameter to the show ports command indicates that a previously entered port description will be included in the display. err_disabled - Choosing this parameter will display ports that have been disconnected due to an error on the port, such as a Loopback Detection. None. 28