D-Link DES-3852 Product Manual - Page 312
create vrrp ipif, DES-3800:admin #create vrrp ipif System vrid 2 ipaddress
UPC - 790069289460
View all D-Link DES-3852 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 312 highlights
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Example usage: To configure a VRRP entry: DES-3800:admin#config vrrp vrid 1 ipif Trinity state enable priority 100 advertisement_interval 2 Command: config vrrp vrid 1 ipif Trinity state enable priority 100 advertisement_interval 2 Success. DES-3800:admin# create vrrp ipif Purpose Syntax Creates a virtual router on an interface. create vrrp ipif vrid ipaddress {state [enable|disable] | priority | advertisement_interval | preempt [true|false] | critical_ip | critical_ip_state [enable|disable]} Description Parameters Restrictions Use this command to create a virtual route on an interface. ipif- Specify the name of interface vrid- Specify the ID of Virtual Router Ipaddress- The virtual router's IP address state- Enable/disable the virtual router function priority- Specify the priority to be used for the Virtual Router master election process advertisement_interval- The time interval, in seconds, between sending advertisement messages preempt- Controls whether a higher priority virtual router will preempt a lower priority master critical_ip- Specify an IP address of a critical interface critical_ip_state- Enable/disable checking the status(active or inactive) of critical ip Only Administrator or Operator-level users can issue this command. Example usage: To create VRRP: DES-3800:admin #create vrrp ipif System vrid 2 ipaddress 10.1.1.1 state enable Command: create vrrp ipif System vrid 2 ipaddress 10.1.1.1 state enable Success. DES-3800:admin# 308