D-Link DGS-6600-48T Configuration Guide - Page 329

Volume 4-Layer 3 Configurations / Chapter 30-Border Gateway Protocol (BGP) Configuration Examples DGS-6600:15# show ip bgp neighbors 192.168.1.1 BGP neighbor is 192.168.1.1, remote AS 65102, local AS 65101, external link BGP version 4, remote router ID 192.168.2.254 BGP state = Established, up for 0DT0H20M59S Last read 0DT0H20M59S, hold time is 180, keepalive interval is 60 seconds Neighbor capabilities: Route refresh: advertised and received (old and new) 4-Byte AS number: advertised AS TRANS: Address family IPv4 Unicast: advertised and received Received 0 in queue Sent 0 in queue Sent Received Opens: 2 1 Notifications: 0 0 Updates: 2 1 Keepalives: 24 22 Route Refresh: 0 0 Dynamic Capability: 0 0 Total: 28 24 Connect retry time is 120 seconds In update elapsed time is 1258 seconds Minimum time between advertisement runs is 30 seconds Minimum time between as origination runs is 15 seconds DGS-6600:15#show ip bgp BGP table version is 15, local router ID is 192.168.1.2 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, S Stale Origin codes: i - IGP, e - EGP, ? - incomplete Network * i 10.1.0.0/16 *> *> 10.2.0.0/16 *> 10.4.0.0/16 * i 10.5.0.0/16 *> *> 192.168.1.0/24 *> 192.168.2.0/24 Next Hop 10.2.2.1 0.0.0.0 10.1.1.1 0.0.0.0 10.2.2.1 10.1.1.1 0.0.0.0 192.168.1.1 Metric 2 0 2 0 2 2 0 0 LocPrf 100 100 Weight 0 32768 32768 32768 0 32768 32768 0 Path 65102 Total Entries: 6 entries, 8 route DGS-6600 Configuration Guide 329