D-Link DGS-6600-48T Configuration Guide - Page 443

Volume 8-Security & Authentication / Chapter 40-802.1X Authentication 802.1X Configuration Commands Resetting the Port Level 802.1X Setting to Defaults Enter the following command in interface configuration mode to reset the 802.1X settings on an interface back to default settings: Command dot1x default Explanation Specifies that the IEEE 802.1X parameters on the specified interface will be reset to default settings. In the following example, the user resets the IEEE 802.1X parameters on Ethernet interface 4.46 back to default settings: DGS-6600:2>enable DGS-6600:15#configure terminal DGS-6600:15(config)#interface eth4.46 DGS-6600:15(config-if)#dot1x default DGS-6600:15(config-if)#end Displaying 802.1X Configuration and Status The following information about the 802.1X configuration and status can be displayed by the Switch: • Displaying Port Authentication Status • Displaying Configuration Settings • Displaying EAPOL Statistics • Displaying State Machine Information for Diagnostics • Displaying Session Statistics Enter the following command to view information about the 802.1X configuration and status: Command show dot1x [interface INTERFACE-ID] {auth-state | auth-configuration | statistics | diagnostics | sessionstatistics} Explanation Displays information about the 802.1X configuration and status. DGS-6600 Configuration Guide 443