D-Link DXS-3400 Emulator - Page 22

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch CLI Reference Guide Usage Guideline Under certain circumstances, the administrator may have the need to update a user's account because the password of the account was forgotten. To do this, the administrator has to enter the Reset Configuration Mode. For assistance on how to enter the reset configuration mode, please contact the technical support personnel. After entering the reset configuration mode, use the password-recovery command and follow the confirmation prompt message to recover the password related settings. Password recovery basically does the following three things: • Update an existing user account by entering the username of an existing user and its new password or add a new user account with a privileged level of 15. The new user account cannot be created if the maximum number of user accounts is exceeded. • Update the enabled password for the administrator-privileged level. • Disable the AAA function to let the system do local authentication. The updated setting will be saved in the running configuration file. Before the reload is executed, the switch will prompt the administrator to approve saving the running configuration as the startup configuration. Example This example shows how to use the password recovery feature. Switch(reset-config)# password-recovery This command will guide you to do the password recovery procedure. Do you want to update the user account? (y/n) [n]y Please input user account: user1 Please input user password: Do you want to update the enable password for privilege level 15? (y/n) [n]y Please input privilege level 15 enable password: Do you want to disable AAA function to let the system do the local authentication? (y/n) [n] y Switch(reset-config)# 2-12 show environment This command is used to display fan, temperature, power availability and status information. show environment [fan | power | temperature] Parameters fan power temperature (Optional) Specifies to display the switch fan detailed status. (Optional) Specifies to display the switch power detailed status. (Optional) Specifies to display the switch temperature detailed status. Default None. Command Mode User/Privileged EXEC Mode. Command Default Level Level: 1. 18