D-Link DXS-3400 Emulator - Page 721

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch CLI Reference Guide feature can only be used when physical stacking is disabled. Default By default, this option is disabled. Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline The user can enable or disable link detection, length detection, dimming LEDs, port shutdown, and hibernation using this command. When link detection is enabled, the device can save power on the inactive ports. When length detection is enabled, the device can reduce the power consumption of a port dependent on the detected cable length. When dim LED is enabled, the device will turn off all the port's LEDs in the specified time range to save power. When port shutdown is enabled, the device will shut off all ports in the specified time range to save power. When Energy-Efficient Ethernet (EEE) is enabled, the device will activate EEE power saving for those EEE enabled ports. When hibernation is enabled, the device will enter the hibernation mode in the specified time range to save power. Example This example shows how to enable power saving by shutting off the switch's ports and toggle the switch into the hibernation mode. Switch# configure terminal Switch(config)# power-saving port-shutdown Switch(config)# power-saving hibernation Switch(config)# 75-3 power-saving eee This command is used to enable the Energy-Efficient Ethernet (EEE) function on the specified port(s). Use the no form of this command to disable the EEE function. power-saving eee no power-saving eee Parameters None. Default By default, this option is disabled. 717