D-Link DXS-3400 Emulator - Page 779

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch CLI Reference Guide For cust2-classes, gold is configured to use Cos Queue 6 and be policed by a single rate policer with a committed rate of 1600 Kbps. Silver is policed by a single rate policer with a committed rate of 4000 Kbps, and bronze is policed by a single rate policer with a committed rate of 16000 Kbps. The cust1-classes policy map is configured and then attached to interfaces ethernet 1/0/1 and 1/0/2 for ingress traffic. Switch# configure terminal Switch(config)# class-map match-all gold Switch(config-cmap)# match cos 6 Switch(config-cmap)# exit Switch(config)# class-map match-all silver Switch(config-cmap)# match cos 5 Switch(config-cmap)# exit Switch(config)# class-map match-all bronze Switch(config-cmap)# match cos 0 Switch(config-cmap)# exit Switch(config)# policy-map cust1-classes Switch(config-pmap)# class gold Switch(config-pmap-c)# police 800 2000 exceed-action set-dscp-transmit 0 Switch(config-pmap-c)# exit Switch(config-pmap)# class silver Switch(config-pmap-c)# police 2000 2000 exceed-action set-dscp-transmit 0 Switch(config-pmap-c)# exit Switch(config-pmap)# class bronze Switch(config-pmap-c)# police 8000 2000 exceed-action set-dscp-transmit 0 Switch(config-pmap-c)# exit Switch(config-pmap)# exit Switch(config)# interface ethernet 1/0/1 Switch(config-if)# service-policy input cust1-classes Switch(config-if)# exit Switch(config)# interface ethernet 1/0/2 Switch(config-if)# service-policy input cust1-classes Switch(config-if)# The cust2-classes policy map is configured and then attached to interface ethernet 1/0/1 for ingress traffic. Switch# configure terminal Switch(config)# policy-map cust2-classes Switch(config-pmap)# class gold Switch(config-pmap-c)# police 1600 2000 exceed-action set-dscp-transmit 0 Switch(config-pmap-c)# exit Switch(config-pmap)# class silver Switch(config-pmap-c)# police 4000 2000 exceed-action set-dscp-transmit 0 Switch(config-pmap-c)# exit Switch(config-pmap)# class bronze Switch(config-pmap-c)# police 16000 2000 exceed-action set-dscp-transmit 0 Switch(config-pmap-c)# exit Switch(config-pmap)# exit Switch(config)# interface ethernet 1/0/1 Switch(config-if)# service-policy input cust2-classes Switch(config-if)# 81-21 set This command is used to configure the new precedence field, DSCP field, and CoS field of the outgoing packet. The user can also specify the CoS queue for the packet. 775