Dacor HGPR30 Installation Instruction - 30" Pro Gas Range - Page 12

Installation Instructions Assembling the Cooktop WARNING Do not use the cooktop unless all burner components and grates are properly in place. • The range uses standard and SimmerSear burners. • Use porcelain or brass burner caps as you prefer. • When assembling the burners, rotate/adjust each part until it seats securely in place for proper function. • Gently set the grates in the spill tray so the feet of each grate rest in their corresponding dimples formed into the spill tray. STEP 3: Place burner cap on top of burner ring. • Flat surface is pointing upward. SimmerSear™ burner Burner cap STEP 2: Install burner ring. • Line up ring tabs with head slots. Burner ring Spill tray Standard burner STEP 1: Install burner head. • Put burner head tab in keyed hole. Burner head STEP 3: Place burner caps on top of rings. • Flat surface is pointing upward. STEP 2: Turn burner ring until it drops into place. Keyed hole Burner base SimmerSear™ Burner Installation STEP 1: Put burner ring on top of head. Burner ring Burner head Standard Burner Installation 10