Dell 1704FPV User Guide - Page 4

Monitor Specifications, Power Management Modes, Pin Assignments

Page 4 highlights

USB connectors (downstream) Left side Right side Monitor Specifications Power Management Modes If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to as 'Power Save Mode'*. If input from keyboard, mouse or other input devices is detected by the computer, the monitor will automatically "wake up". The following table shows the power consumption and signaling of this automatic power saving feature: VESA Modes Horizontal Sync Vertical Sync Video Power Indicator Power Consumption Normal operation( with Dell Soundbar and USB active) Active Active Active Green 65 W (maximum) Normal operation Active Active Active Green 32 W (typical) Active-off mode Inactive Inactive Blanked Amber Less than 3 W Switch off - - - Off Less than 1 W NOTE: The OSD will only function in the 'normal operation' mode. Otherwise one of the following messages will appear when the "menu" or "plus" buttons are pressed when in Active-off mode. 1. Analog Input 2. Digital Input In Power Save Mode or In Power Save Mode Press Any Key on Keyboard or Move Mouse Press Any Key on Keyboard or Move Mouse Activate the computer and 'wake up' the monitor to gain access to the OSD. This monitor is ENERGY STAR®-compliant as well as TCO '99 / TCO '03 power management compatible. * Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor. ENERGY STAR® is a U.S. registered mark. As an ENERGY STAR® Partner, DELL has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Pin Assignments 15-pin D-Sub connector: Pin Number Monitor Side of the 15-Pin Side Signal Cable

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57

USB connectors (downstream)
Left side
Right side
Monitor Specifications
Power Management Modes
If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is
referred to as 'Power Save Mode'*. If input from keyboard, mouse or other input devices is detected by the computer, the monitor will automatically "wake up". The following
table shows the power consumption and signaling of this automatic power saving feature:
VESA Modes
Horizontal Sync
Vertical Sync
Video
Power Indicator
Power Consumption
Normal operation( with Dell Soundbar and USB active)
Active
Active
Active
Green
65 W (maximum)
Normal operation
Active
Active
Active
Green
32 W (typical)
Active-off mode
Inactive
Inactive
Blanked
Amber
Less than 3 W
Switch off
-
-
-
Off
Less than 1 W
NOTE: The OSD will only function in the 'normal operation' mode. Otherwise one of the following messages will
appear when the “menu” or “plus” buttons are pressed when in Active-off mode.
1. Analog Input
In Power Save Mode
Press Any Key on Keyboard or Move Mouse
or
2. Digital Input
In Power Save Mode
Press Any Key on Keyboard or Move Mouse
Activate the computer and 'wake up' the monitor to gain access to the
OSD
.
This monitor is
ENERGY STAR
®-compliant as well as TCO '99 / TCO '03 power management compatible.
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.
ENERGY STAR
® is a U.S. registered mark. As an
ENERGY STAR
® Partner, DELL has determined that this product meets the
ENERGY STAR
® guidelines for energy
efficiency.
Pin Assignments
15-pin D-Sub connector:
Pin Number
Monitor Side of the 15-Pin Side Signal Cable