Home » Dell Manuals » Storage Adapters » Dell 341-7212 » Manual Viewer

Dell 341-7212 User Guide - Page 61

Other Dell SAS RAID Storage Manager Messages

Add to My Manuals
Save this manual to your list of manuals

Page 61 highlights

Other Dell SAS RAID Storage Manager Messages Table 7-2 lists other messages generated by Dell SAS RAID Storage Manager and explains what should be done to respond to them. Table 7-2. Dell SAS RAID Storage Manager Messages Message Event ID 0X27 Message 4007 Message 4008 Message 4009 Message 4022 Message 8107 Message 8109 Message 800E Meaning Action This means that patrol read Change the patrol read mode to is disabled. This message Auto or Manual from Disabled. See displays if you try to start Running a Patrol Read in Chapter 5 patrol read when it is not for detailed instructio ns. enabled. A Start Rebuild command See the Dell knowledgebase articles was issued, but rebuild was on support.dell.com. not able to start. A Make Drive Online command was issued. See the Dell knowledgebase articles on support.dell.com. You are attempting to create The operation is not supported. a virtual disk with a mix of Select only SAS or only SATA drives SAS and SATA physical when creating a virtual disk. drives. Required hardware, such as No action is required; these a battery backup unit, is functions are not supported. missing. You sent a Start Locate or Stop Locate command to a physical drive that is not connected to a backplane (that is, not in a disk enclosure). Command not supported on this hardware config (informational message only). File selected to upgrade See Upgrading the Firmware for firmware is invalid for that instructions on how to upgrade the controller. firmware. You sent an Undo Prepare The hardware configuration is not Removal command to a supported. physical drive that does not support this command. Troubleshooting 61

Section	Page
User’s Guide	1
Introduction	7
Creating Storage Configurations	7
Monitoring Storage Devices	7
Maintaining Storage Configurations	8
Comparison of Supported Features	8
Installation	11
Installing Dell SAS RAID Storage Manager on Microsoft Windows	11
Installing Dell SAS RAID Storage Manager on Linux	12
Linux Installation Error Messages	12
Dell SAS RAID Storage Manager Windows and Menus	15
Starting Dell SAS RAID Storage Manager	15
Dell SAS RAID Storage Manager Window	16
Physical/Logical View Panel	16
Properties/Operations/Graphical View Panel	17
Event Log Panel	18
Menu Bar	18
Configuration	21
Creating a New Configuration on a SAS 5/iR Controller or on a SAS 6/iR Controller	21
Creating a RAID 0 Configuration on a SAS 5/iR Controller or on a SAS 6/iR Controller	22
Creating a RAID 1 Configuration on a SAS 5/iR Controller or on a SAS 6/iR Controller	23
Creating a New Configuration on a Dell PERC 5/i Controller or on a Dell PERC 6/i Controller	24
Understanding Virtual Disk Parameters	25
Using Auto Configuration on a Dell PERC 5/i Controller or on a Dell PERC 6/i Controller	26
Using Guided Configuration on a Dell PERC 5/i Controller or on a Dell PERC 6/i Controller	28
Using Manual Configuration on a Dell PERC 5/i Controller or on a Dell PERC 6/i Controller (RAID 0, 1, 5, and 6)	30
Using Manual Configuration on a Dell PERC 5/i Controller or on a Dell PERC 6/i Controller (RAID 10)	32
Adding Hotspare Disks	34
Using the Replace Member Feature and Revertible Hot Spares	35
Changing Adjustable Task Rates	36
Changing Virtual Disk Properties	37
Changing a Virtual Disk Configuration	38
Adding a Disk Drive to a Configuration on a PERC 5/i Controller or on a PERC 6/i Controller	39
Changing the RAID Level of a Configuration on a PERC 5/i Controller or on a PERC 6/i Controller	40
Deleting a Virtual Disk	40
Saving a Storage Configuration to Disk	41
Clearing a Storage Configuration from a Controller	41
Adding a Saved Storage Configuration	42
Monitoring System Events and Storage Devices	43
Monitoring System Events	43
Monitoring Controllers	44
Monitoring Disk Drives	44
Running a Patrol Read	45
Monitoring Virtual Disks	46
Monitoring Rebuilds and Other Processes	47
Maintaining and Managing Storage Configurations	49
Initializing Virtual Disks	49
Running a Consistency Check	50
Scheduling a Consistency Check	50
Scanning for New Drives	51
Scanning for Foreign Configurations	51
Clearing a Foreign Configuration	52
Rebuilding a Drive	52
Rebuilding a Drive on a Dell SAS 5/iR System or on a Dell SAS 6/iR System	53
Rebuilding a Drive on a Dell PERC 5/i System or on a Dell PERC 6/i System	54
Making a Drive Offline or Missing	55
Preserving Pinned Cache	55
Upgrading the Firmware	57
Troubleshooting	59
Pinned Cache State	59
Windows Installation Error Messages	60
Linux Installation Error Messages	60
Other Dell SAS RAID Storage Manager Messages	61