Home » Dell Manuals » Storage Adapters » Dell 341-7212 » Manual Viewer

Dell 341-7212 User Guide - Page 76

Controller Hot Plug detected, Foreign Configuration Imported

Add to My Manuals
Save this manual to your list of manuals

Page 76 highlights

Table A-2. Event Messages (continued) Number 0x00d1 0x00d2 0x00d3 0x00d4 0x00d5 0x00d6 0x00d7 0x00d8 Type Info Info Caution Info Info Caution Info Caution 0x00d9 0x00da 0x00db 0x00dc 0x00dd 0x00de 0x00df 0x00e0 0x00e1 0x00e2 0x00e3 0x00e4 0x00e5 0x00e6 Info Info Info Info Warning Warning Warning Info Warning Warning Info Warning Info Info 0x00e7 Info 0x00e8 Info 0x00e9 Info Event Text BBU Retention test was initiated on previous boot BBU Retention test passed BBU Retention test failed! NVRAM Retention test was initiated on previous boot NVRAM Retention test passed NVRAM Retention test failed! %s test completed %d passes successfully %s test FAILED on %d pass. Fail data: errorOffset=%x goodData=%x badData=%x Self check diagnostics completed Foreign Configuration Detected Foreign Configuration Imported Foreign Configuration Cleared NVRAM is corrupt; reinitializing NVRAM mismatch occurred SAS wide port %d lost link on PHY %d SAS wide port %d restored link on PHY %d SAS port %d, PHY %d has exceeded the allowed error rate Bad block reassigned on %s at %lx to %lx Controller Hot Plug detected Enclosure %s temperature sensor %d differential detected Disk test cannot start. No qualifying disks found Time duration provided by host is not sufficient for self check Marked Missing for %s on array %d row %d Replaced Missing as %s on array %d row %d Enclosure %s Temperature %d returned to normal 76 Events and Messages

Section	Page
User’s Guide	1
Introduction	7
Creating Storage Configurations	7
Monitoring Storage Devices	7
Maintaining Storage Configurations	8
Comparison of Supported Features	8
Installation	11
Installing Dell SAS RAID Storage Manager on Microsoft Windows	11
Installing Dell SAS RAID Storage Manager on Linux	12
Linux Installation Error Messages	12
Dell SAS RAID Storage Manager Windows and Menus	15
Starting Dell SAS RAID Storage Manager	15
Dell SAS RAID Storage Manager Window	16
Physical/Logical View Panel	16
Properties/Operations/Graphical View Panel	17
Event Log Panel	18
Menu Bar	18
Configuration	21
Creating a New Configuration on a SAS 5/iR Controller or on a SAS 6/iR Controller	21
Creating a RAID 0 Configuration on a SAS 5/iR Controller or on a SAS 6/iR Controller	22
Creating a RAID 1 Configuration on a SAS 5/iR Controller or on a SAS 6/iR Controller	23
Creating a New Configuration on a Dell PERC 5/i Controller or on a Dell PERC 6/i Controller	24
Understanding Virtual Disk Parameters	25
Using Auto Configuration on a Dell PERC 5/i Controller or on a Dell PERC 6/i Controller	26
Using Guided Configuration on a Dell PERC 5/i Controller or on a Dell PERC 6/i Controller	28
Using Manual Configuration on a Dell PERC 5/i Controller or on a Dell PERC 6/i Controller (RAID 0, 1, 5, and 6)	30
Using Manual Configuration on a Dell PERC 5/i Controller or on a Dell PERC 6/i Controller (RAID 10)	32
Adding Hotspare Disks	34
Using the Replace Member Feature and Revertible Hot Spares	35
Changing Adjustable Task Rates	36
Changing Virtual Disk Properties	37
Changing a Virtual Disk Configuration	38
Adding a Disk Drive to a Configuration on a PERC 5/i Controller or on a PERC 6/i Controller	39
Changing the RAID Level of a Configuration on a PERC 5/i Controller or on a PERC 6/i Controller	40
Deleting a Virtual Disk	40
Saving a Storage Configuration to Disk	41
Clearing a Storage Configuration from a Controller	41
Adding a Saved Storage Configuration	42
Monitoring System Events and Storage Devices	43
Monitoring System Events	43
Monitoring Controllers	44
Monitoring Disk Drives	44
Running a Patrol Read	45
Monitoring Virtual Disks	46
Monitoring Rebuilds and Other Processes	47
Maintaining and Managing Storage Configurations	49
Initializing Virtual Disks	49
Running a Consistency Check	50
Scheduling a Consistency Check	50
Scanning for New Drives	51
Scanning for Foreign Configurations	51
Clearing a Foreign Configuration	52
Rebuilding a Drive	52
Rebuilding a Drive on a Dell SAS 5/iR System or on a Dell SAS 6/iR System	53
Rebuilding a Drive on a Dell PERC 5/i System or on a Dell PERC 6/i System	54
Making a Drive Offline or Missing	55
Preserving Pinned Cache	55
Upgrading the Firmware	57
Troubleshooting	59
Pinned Cache State	59
Windows Installation Error Messages	60
Linux Installation Error Messages	60
Other Dell SAS RAID Storage Manager Messages	61

Match case Limit results 1 per page

Events and Messages

0x00d1

Info

BBU Retention test was initiated on previous boot

0x00d2

Info

BBU Retention test passed

0x00d3

Caution

BBU Retention test failed!

0x00d4

Info

NVRAM Retention test was initiated on previous boot

0x00d5

Info

NVRAM Retention test passed

0x00d6

Caution

NVRAM Retention test failed!

0x00d7

Info

%s test completed %d passes successfully

0x00d8

Caution

%s test FAILED on %d pass. Fail data: errorOffset=%x

goodData=%x badData=%x

0x00d9

Info

Self check diagnostics completed

0x00da

Info

Foreign Configuration Detected

0x00db

Info

Foreign Configuration Imported

0x00dc

Info

Foreign Configuration Cleared

0x00dd

Warning

NVRAM is corrupt; reinitializing

0x00de

Warning

NVRAM mismatch occurred

0x00df

Warning

SAS wide port %d lost link on PHY %d

0x00e0

Info

SAS wide port %d restored link on PHY %d

0x00e1

Warning

SAS port %d, PHY %d has exceeded the allowed error rate

0x00e2

Warning

Bad block reassigned on %s at %lx to %lx

0x00e3

Info

Controller Hot Plug detected

0x00e4

Warning

Enclosure %s temperature sensor %d differential detected

0x00e5

Info

Disk test cannot start. No qualifying disks found

0x00e6

Info

Time duration provided by host is not sufficient for self

check

0x00e7

Info

Marked Missing for %s on array %d row %d

0x00e8

Info

Replaced Missing as %s on array %d row %d

0x00e9

Info

Enclosure %s Temperature %d returned to normal

Table A-2.

Event Messages

(continued)

Number

Type

Event Text