Home » Dell Manuals » Storage Adapters » Dell 341-7212 » Manual Viewer

Dell 341-7212 User Guide - Page 67

Events and Messages

Add to My Manuals
Save this manual to your list of manuals

Page 67 highlights

Events and Messages This appendix lists the Dell SAS RAID Storage Manager events that might appear in the event log. Dell SAS RAID Storage Manager monitors the activity and performance of all controllers in the workstation and the devices attached to them. When an event occurs, such as the start of an initialization, an event message appears in the log at the bottom of the Dell SAS RAID Storage Manager window. Each message that appears in the event log has an Error Level that indicates the severity of the event, as shown in Table A-1. Table A-1. Event Error Levels Error Level Meaning Info Informational message. No user action is necessary. Warning Some component might be close to a failure point. Caution A component has failed, but the system has not lost data. Fatal A component has failed and data loss has occurred or will occur. Dead A catastrophic error has occurred and the controller has died. This event is seen only after the controller has been restarted. List of System Event Messages Table A-2 lists all of the Dell SAS RAID Storage Manager event messages. The event message descriptions include placeholders for specific values that are determined when the event is generated. For example, in message #1 in the Event Messages table "%s" is replaced by the firmware version, which is read from the firmware when the event is generated. Table A-2. Event Messages Number Type 0x0000 Info 0x0001 Info Event Text MegaRAID firmware initialization started (PCI ID %04x/%04x/%04x/%04x) MegaRAID firmware version %s Events and Messages 67

Section	Page
User’s Guide	1
Introduction	7
Creating Storage Configurations	7
Monitoring Storage Devices	7
Maintaining Storage Configurations	8
Comparison of Supported Features	8
Installation	11
Installing Dell SAS RAID Storage Manager on Microsoft Windows	11
Installing Dell SAS RAID Storage Manager on Linux	12
Linux Installation Error Messages	12
Dell SAS RAID Storage Manager Windows and Menus	15
Starting Dell SAS RAID Storage Manager	15
Dell SAS RAID Storage Manager Window	16
Physical/Logical View Panel	16
Properties/Operations/Graphical View Panel	17
Event Log Panel	18
Menu Bar	18
Configuration	21
Creating a New Configuration on a SAS 5/iR Controller or on a SAS 6/iR Controller	21
Creating a RAID 0 Configuration on a SAS 5/iR Controller or on a SAS 6/iR Controller	22
Creating a RAID 1 Configuration on a SAS 5/iR Controller or on a SAS 6/iR Controller	23
Creating a New Configuration on a Dell PERC 5/i Controller or on a Dell PERC 6/i Controller	24
Understanding Virtual Disk Parameters	25
Using Auto Configuration on a Dell PERC 5/i Controller or on a Dell PERC 6/i Controller	26
Using Guided Configuration on a Dell PERC 5/i Controller or on a Dell PERC 6/i Controller	28
Using Manual Configuration on a Dell PERC 5/i Controller or on a Dell PERC 6/i Controller (RAID 0, 1, 5, and 6)	30
Using Manual Configuration on a Dell PERC 5/i Controller or on a Dell PERC 6/i Controller (RAID 10)	32
Adding Hotspare Disks	34
Using the Replace Member Feature and Revertible Hot Spares	35
Changing Adjustable Task Rates	36
Changing Virtual Disk Properties	37
Changing a Virtual Disk Configuration	38
Adding a Disk Drive to a Configuration on a PERC 5/i Controller or on a PERC 6/i Controller	39
Changing the RAID Level of a Configuration on a PERC 5/i Controller or on a PERC 6/i Controller	40
Deleting a Virtual Disk	40
Saving a Storage Configuration to Disk	41
Clearing a Storage Configuration from a Controller	41
Adding a Saved Storage Configuration	42
Monitoring System Events and Storage Devices	43
Monitoring System Events	43
Monitoring Controllers	44
Monitoring Disk Drives	44
Running a Patrol Read	45
Monitoring Virtual Disks	46
Monitoring Rebuilds and Other Processes	47
Maintaining and Managing Storage Configurations	49
Initializing Virtual Disks	49
Running a Consistency Check	50
Scheduling a Consistency Check	50
Scanning for New Drives	51
Scanning for Foreign Configurations	51
Clearing a Foreign Configuration	52
Rebuilding a Drive	52
Rebuilding a Drive on a Dell SAS 5/iR System or on a Dell SAS 6/iR System	53
Rebuilding a Drive on a Dell PERC 5/i System or on a Dell PERC 6/i System	54
Making a Drive Offline or Missing	55
Preserving Pinned Cache	55
Upgrading the Firmware	57
Troubleshooting	59
Pinned Cache State	59
Windows Installation Error Messages	60
Linux Installation Error Messages	60
Other Dell SAS RAID Storage Manager Messages	61