Home » Dell Manuals » Storage Adapters » Dell 341-7212 » Manual Viewer

Dell 341-7212 User Guide - Page 62

Table 7-2., Dell SAS RAID Storage Manager Messages, Message, Meaning, Action

Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

Table 7-2. Dell SAS RAID Storage Manager Messages (continued) Message Meaning Action Guided Configuration Failed! Dell SAS RAID Storage Close the Configuration Wizard and Manager could not proceed then retry. with guided configuration. This might occur because the underlying hardware resources were changed during the configuration: for example, a drive was removed. Cannot read Foreign Config! An error occurred while Dell Move the configuration back to the SAS RAID Storage Manager system where it came from and was attempting to read a verify the configuration there. Foreign Configuration. Dell SAS RAID Storage Manager is unable to read the configuration. No Foreign Configuration is found! Dell SAS RAID Storage Scan the system again to attempt to Manager found a data read the foreign configuration. If inconsistency while reading this fails, the configuration might be a foreign configuration. The corrupted. foreign configuration is invalid. Operation cannot You tried to start another Wait for the reconstruction be started while operation in Dell SAS RAID operation to complete and then reconstruction is Storage Manager while a retry the operation. in progress! reconstruction was running. Guided Configuration failed! Dell SAS RAID Storage Close the Configuration Wizard and Manager could not proceed then retry it. with guided configuration. This might occur because the underlying hardware resources were changed during the configuration: for example, a drive was removed. 62 Troubleshooting

Section	Page
User’s Guide	1
Introduction	7
Creating Storage Configurations	7
Monitoring Storage Devices	7
Maintaining Storage Configurations	8
Comparison of Supported Features	8
Installation	11
Installing Dell SAS RAID Storage Manager on Microsoft Windows	11
Installing Dell SAS RAID Storage Manager on Linux	12
Linux Installation Error Messages	12
Dell SAS RAID Storage Manager Windows and Menus	15
Starting Dell SAS RAID Storage Manager	15
Dell SAS RAID Storage Manager Window	16
Physical/Logical View Panel	16
Properties/Operations/Graphical View Panel	17
Event Log Panel	18
Menu Bar	18
Configuration	21
Creating a New Configuration on a SAS 5/iR Controller or on a SAS 6/iR Controller	21
Creating a RAID 0 Configuration on a SAS 5/iR Controller or on a SAS 6/iR Controller	22
Creating a RAID 1 Configuration on a SAS 5/iR Controller or on a SAS 6/iR Controller	23
Creating a New Configuration on a Dell PERC 5/i Controller or on a Dell PERC 6/i Controller	24
Understanding Virtual Disk Parameters	25
Using Auto Configuration on a Dell PERC 5/i Controller or on a Dell PERC 6/i Controller	26
Using Guided Configuration on a Dell PERC 5/i Controller or on a Dell PERC 6/i Controller	28
Using Manual Configuration on a Dell PERC 5/i Controller or on a Dell PERC 6/i Controller (RAID 0, 1, 5, and 6)	30
Using Manual Configuration on a Dell PERC 5/i Controller or on a Dell PERC 6/i Controller (RAID 10)	32
Adding Hotspare Disks	34
Using the Replace Member Feature and Revertible Hot Spares	35
Changing Adjustable Task Rates	36
Changing Virtual Disk Properties	37
Changing a Virtual Disk Configuration	38
Adding a Disk Drive to a Configuration on a PERC 5/i Controller or on a PERC 6/i Controller	39
Changing the RAID Level of a Configuration on a PERC 5/i Controller or on a PERC 6/i Controller	40
Deleting a Virtual Disk	40
Saving a Storage Configuration to Disk	41
Clearing a Storage Configuration from a Controller	41
Adding a Saved Storage Configuration	42
Monitoring System Events and Storage Devices	43
Monitoring System Events	43
Monitoring Controllers	44
Monitoring Disk Drives	44
Running a Patrol Read	45
Monitoring Virtual Disks	46
Monitoring Rebuilds and Other Processes	47
Maintaining and Managing Storage Configurations	49
Initializing Virtual Disks	49
Running a Consistency Check	50
Scheduling a Consistency Check	50
Scanning for New Drives	51
Scanning for Foreign Configurations	51
Clearing a Foreign Configuration	52
Rebuilding a Drive	52
Rebuilding a Drive on a Dell SAS 5/iR System or on a Dell SAS 6/iR System	53
Rebuilding a Drive on a Dell PERC 5/i System or on a Dell PERC 6/i System	54
Making a Drive Offline or Missing	55
Preserving Pinned Cache	55
Upgrading the Firmware	57
Troubleshooting	59
Pinned Cache State	59
Windows Installation Error Messages	60
Linux Installation Error Messages	60
Other Dell SAS RAID Storage Manager Messages	61