Dell Alienware m15 R3 Service Manual - Page 17
M.2 solid-state drive, Removing the M.2 2230 solid-state drive
View all Dell Alienware m15 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Steps 1. Place the battery on the palm-rest assembly. 2. Align the screw holes on the batery to the screw holes on the palm-rest assembly. 3. Replace the four screws (M2x4) that secure the battery to the palm-rest assembly. 4. Replace the four screws (M2x3) that secure the battery to the palm-rest assembly. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. M.2 solid-state drive Removing the M.2 2230 solid-state drive Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task NOTE: This procedure applies only to computers shipped with a M.2 2230 solid-state drive installed in the following M.2 card slots: • M.2 card slot 1 • M.2 card slot 2 The following image(s) indicate the location of the M.2 2230 solid-state drive and provides a visual representation of the removal procedure. 17