Dell Alienware m15 R3 Service Manual - Page 21

Removing the M.2 2280 solid-state drive, Steps, Next steps, Prerequisites

Page 21 highlights

Steps 1. Place the M.2 2230 mounting bracket on the palm-rest assembly. 2. Align the screw hole on the M.2 2230 mounting bracket to the screw hole on the palm-rest assembly. 3. Replace the screw (M2x2.5) that secures the M.2 2230 mounting bracket to the palm-rest assembly. 4. Align the notch on the M.2 2230 solid-state drive with the tab on the M.2 card slot on the system board. 5. Slide the M.2 2230 solid-state drive into the M.2 card slot on the system board. 6. Slide the M.2 2230 thermal shield into the slot on the M.2 SSD frame. 7. Align the screw hole on the M.2 2230 thermal shield to the screw hole on the M.2 2230 mounting bracket. 8. Replace the screw (M2x2.5) that secures the M.2 2230 solid-state drive and thermal shield to the M.2 2230 mounting bracket. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Removing the M.2 2280 solid-state drive Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80

Steps
1.
Place the M.2 2230 mounting bracket on the palm-rest assembly.
2.
Align the screw hole on the M.2 2230 mounting bracket to the screw hole on the palm-rest assembly.
3.
Replace the screw (M2x2.5) that secures the M.2 2230 mounting bracket to the palm-rest assembly.
4.
Align the notch on the M.2 2230 solid-state drive with the tab on the M.2 card slot on the system board.
5.
Slide the M.2 2230 solid-state drive into the M.2 card slot on the system board.
6.
Slide the M.2 2230 thermal shield into the slot on the M.2 SSD frame.
7.
Align the screw hole on the M.2 2230 thermal shield to the screw hole on the M.2 2230 mounting bracket.
8.
Replace the screw (M2x2.5) that secures the M.2 2230 solid-state drive and thermal shield to the M.2 2230 mounting bracket.
Next steps
1.
Install the
base cover
.
2.
Follow the procedure in
After working inside your computer
.
Removing the M.2 2280 solid-state drive
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
21